Extang Trifecta 2.0 Tonneau Cover Replacment Side Seal

Question

Question:

I need to replace the side seal for my Extang Trifecta 2.0 Tonneau Cover EXT-92445. The Side Seal for Extang Solid Fold 2.0 Tonneau Covers seems to look similar to the type I need. Please advise..

asked by: John M

0

Expert Reply:

I reached out to Extang and the Replacement Side Seal for Extang Tonneau Covers part # EX32560368 is the correct seal to replace the damaged one on your Extang Trifecta 2.0 Tonneau Cover.

expert reply by: Randy B

0

Answer 1

view full answer...

Answer 2

The Replacement Tailgate Seal #EX32563200 is the exact fit seal for your 2015 Nissan Frontier and has a 1 inch width, and is the correct part you will need. The Seal #EX32FR is a universal fit and has a 3/8 inch width. This seal is 6 foot long. The…

view full answer...

Answer 3

Hey Dave! We have three different types of replacement seals for the Extang Solid Fold 2.0 Tonneau Covers. I have listed them below: Replacement Side Seal for Extang Solid Fold 2.0 Tonneau Covers item #EX32560368 Replacement Cab Seal for Extang Solid…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey Jon, typically people replace the Dometic 310 RV toilet with the 410 which we have with the part #DMC64JF for a tan porcelain or the part #DMC44JF for a white porcelain. These are both standard height toilets with a round bowl and a slow close…

view full answer...

Extang Trifecta 2.0 Tonneau Cover Replacment Side Seal

Product Page this Question was Asked From

Continue Researching