Replacement Hub and Rotor for 3,500 lb Axle of Trailstar Trailer

Updated 08/18/2020 | Published 08/14/2020

Products Featured in This Question

Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles - 8 on 6-1/2 - Oil Bath

(58)

$482.04

Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs

(92)

$540.83

Question:

Hi, I have a 2004 Trailstar boat trailer and Im needing a new hub assembly with 9.25 disk brake rotor, non-vented, bearing kit and brake pads. Its a 5 on 4.5. I have attached several pics, including the trailer sticker with all the info about the model, etc. I have called Trailstar, Tracker, Bass Pro and a local shop but no one was able to provide me with any information on what replacement parts will fit my trailer. If you could please help, it would be much appreaciated. Thanks,

asked by: Josh L

Expert Reply:

I am sure we can help replace all of the brake components but without a brand I can't really help pin point just the hub/rotor. Instead the best we could do is a kit that replaces the hub rotors, the mounting bracket, and the calipers.

So you could use the part # K2HR35D and have a replacement for both sides of your axle and you'd be set. This has the correct capacity of 3,500 lb and bolt pattern of 5 on 4-1/2 inch.

expert reply by: Jameson C