Recommended Replacement Shank for Blue Ox Sway Control With Larger Rise or Drop
Published 08/12/2020
Products Featured in This Question
Question:
That is not quite what I am looking for. Your solution would require that I unbolt the Blue Ox head from my existing shank, and remount onto the new shank. And then back to the old one to tow with the original vehicle. What I would like is a separate shank and head setup up so I can just slide and go with either vehicle.
asked by: Kevin D
Expert Reply:
To use the Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW1000 with a vehicle that has a different height, you don't need to replace the entire system, you just may need a longer shank for increased rise or drop. I recommend using the Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 12" Long - 9 Hole Adjustment # BXW4003.
Product Page this Question was Asked From
Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- Blue Ox
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Spring Bars for Blue Ox SwayPro Weight Distribution System - 750 lbs TW
- Shop: Replacement Spring Bars for Blue Ox SwayPro Weight Distribution System - 1,000 lbs TW
- Video: All About the Replacement Spring Bars for Blue Ox SwayPro Weight Distribution System
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 12" Long - 9 Hole Adjustment
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 9" Long - 9 Hole Adjustment
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 10,000 lbs GTW, 1,000 lbs TW
- Search Results: locking hitch pin hitch pins and clips
- Search Results: locking hitch pin
- Search Results: fits 2 inch hitch hitch pins and clips
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 14" Long - 11 Hole Adjustment
- Shop: Blue Ox Trailer Hitch Receiver Lock - 5/8" Diameter
- Video: All About the Replacement Leg Kit for etrailer RV Dinette Tables
- Shop: RV Covers
- Q&A: Recommended Replacement Spring Bars For Blue Ox SwayPro Weight Distribution System
- Q&A: What is Width of Vertical Bracket of Blue Ox SwayPro Weight Distribution Shank
- Shop: Trailer Hitch
- Video: Detailed Breakdown of the 2" Hitch Ball
- Video: Ultimate Overview of the 2" Hitch Ball
- Q&A: Can 750 Pound Spring Bars Be Used on 550 Pound Blue Ox Weight Distribution System
- Q&A: Weight Distribution System Needed for 3,000 lb and 6,000 lb Trailers
- Q&A: Recommended Spring Bar Replacements For My Blue OX Sway Pro
- Q&A: Blue Ox SwayPro Spring Bar Recommendation for Tongue Weight of 700 lbs
- Q&A: What Replacement Spring Bars Do I Need For the Blue Ox SwayPro Weight Distribution System
- Video: Equal-i-zer Weight Dist Shank: The Breakdown
- Video: Review of BulletProof Hitches Weight Distribution Shank 2-1/2 Inch Receiver - BPH75RR
- Search Results: bph75rr
- Search Results: trailer box
- Search Results: truck bed storage
- Search Results: ramps
Kevin
8/12/2020
That is not quite what I am looking for. Your solution would require that I unbolt the Blue Ox head from my existing shank, and remount onto the new shank. And then back to the old one to tow with the original vehicle. What I would like is a separate shank and head setup up so I can just slide and go with either vehicle.