How Does The Transmitter Get It's Power On The Custer 23" Wireless LED Light Bar
Updated 07/30/2020 | Published 07/28/2020 >
Question:
How does the transmitter get its power? It says 4r radio powered and I believe that it means it has its own internal battery. If so, how long do they last typical with regular usage 10 hrs per day Can the internal battery be replaced? Also, this says its a 7 round. Is there an option to choose 7 round heavy duty, vs 7 round blade? Thanks
asked by: Timothy J
Expert Reply:
The transmitter for the Custer Wireless LED Tow Bar Light - Weatherproof - Magnetic Base - 23" Long - 7-Way Round Item # LIW-LDTL-7B gets it's power through the 7 Pole plug on the back of the RV. When the RV has power at the plug and the 7 pole is plugged in, the transmitter sends the signal to the light. The light has a 3AH battery which can be replaced. There is a panel on the bottom of the light to access the battery. A charge typically last about 6-8 hours. Keep in mind it is recommended to recharge the light at the end of each day of use. In order to switch the 7 round blade style plug to a 7 round heavy plug, it would have to made to order through the manufacturer because the 7 round heavy duty functions a little different and the color of the lights will be different.
Product Page this Question was Asked From
Wireless LED Tow Light Bar - Magnetic - Weatherproof - 23" Long - 7-Way Round
- Flat Tow Wiring Harness
- Bypasses Vehicle Wiring
- Removable Tail Light Kit
- Universal Fit
- 7 Round
- Custer
more information >
Continue Researching
- Shop: Wireless LED Tow Light Bar - Magnetic - Weatherproof - 23" Long - 7-Way Round
- Shop: Demco LED Tow Light Bar for Towed Vehicles w/ Wireless Transmitter - 12V Power
- Video: Custer Wireless LED Tow Bar Light Review
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Shop: Vehicle Lights
- Video: DIY Install: Roadmaster Direct-Connect Base Plate Kit on your 2015 Fiat 500L
- Video: Feature Breakdown: Custer Wireless LED Tow Bar Light
- Video: A Closer Look at the Valterra Elbow DWV Fitting for RV Sewer System
- Shop: Wireless LED Tow Light Bar - Magnetic - Weatherproof - 23" Long - 4-Pin Round
- Search Results: skid wheel
- Search Results: rv jack pads
- Shop: Universal Magnetic Tow Lights - 20' Wiring Harness with 4-Way Flat Trailer Connector
- Shop: Replacement Pad for SnapPad Jack Stand Pad System - 7" Square Jack Foot
- Search Results: magnetic tow lights
- Q&A: What Type of Power Does Custer Wireless LED Tow Bar Light # LIW-LDTL-7B Use for Charging
- Video: What to Know About the Valterra RV Sewer Elbow
- Video: Comprehensive Review: Valterra DWV Coupling for RV Sewer System
- Video: All About the Valterra Elbow DWV Fitting for RV Sewer System
- Shop: Valterra RV Sewer Elbow - 90-Degree - 3" Lug x 3" Rotating Flange
- Shop: Trailer Hitch
- Search Results: butyl sealant
- Q&A: Holding Tank Fitting 3 Hub Fitting
- Q&A: Height and Width of Valterra RV Sewer Elbow # T1035-1
- Q&A: Flange to Furthest Point Out on Valterra RV Sewer Elbow # T1035-1
- Q&A: Measurement of Valterra RV Sewer Elbow with Rotating Flange
- Q&A: White Stuff On The Connection Between the Black Tank and ABS Fitting?
- Search Results: rv sewer hose fittings
- Q&A: How is the 7 Way Plug on the Custer Wireless LED Tow Bar Light Wired
- Shop: Trailer Wiring
- Search Results: transformer

