Threaded Hitch Pin Replacement for Transit Bike Rack

Question

Question:

Need threaded pin for Transit bike rack

asked by: Steven R

0

Expert Reply:

The Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers part # SR0901 should fit as a replacement and get you back out exploring. We do not carry the Transit rack it appears to have a standard sized 1/2x20 threaded bolt.

I've linked a video for you to check out on it.

expert reply by: Randy B

0

Answer 1

I was able to find some information about the TransIt hitch-mount platform style bike racks in my research but not about the specific type of hitch pin or lock they use. Most bike rack manufacturers use their own unique proprietary bolts/locks with…

view full answer...

Answer 2

Hey Michael, welcome back! You can use the Replacement Anti-Rattle Hitch Pin for Curt Bike Racks item #C82NR with the 17x46 Curt Cargo Carrier item #C18145. It's a 1/2" hex bolt with a 13 thread pitch. I don't have the length but if…

view full answer...

Answer 3

Jan, for your Curt Bike Rack #C18064 you can use the Replacement Anti-Rattle Hitch Pin for Curt Bike Racks #C82NR.

view full answer...

Answer 4

We do not carry the Xport brand here at etrailer but I did speak to my contact at Hollywood Racks who is familiar with the low-cost Xport racks and he advised that there is a Hollywood Racks replacement part that should work for your platform…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Threaded Hitch Pin Replacement for Transit Bike Rack

Featured Help Information

Miscellaneous Media

Continue Researching