Andersen Hitch Locks - Standard Pin Lock - AM3492 Review Video

They sure do Mike! Our etrailer Invisible Base Plate Kit item #e56GV is going to attach directly to the frame of your 2023 Ford Bronco so long as you have the Ford Performance Heavy Duty Modular Bumper or standard plastic bumper. The baseplate will…

Hey Mark, yes the etrailer base plate kit part #e56GV does fit your 2025 Ford Bronco Raptor. Do you have the rest of your flat towing setup picked out already?

Hey Michael! That restriction would be for a ball mount towing a trailer with tongue weight. It is different when you're flat towing your 2016 Chevrolet Equinox. You want to be within 3" of level so you can use the Roadmaster High-Low…

Hey Jonathan, congrats on the new truck. The 7" drop should be enough, but it is hard to say for sure without knowing what trailer you will be pulling. The 7" drop will get your ball height at 17" or 18" (we measure from the upper…

The Rapid Hitch Trailer Locking Hitch Pins come in 2 sets. One, part #AM3492, has two hitch pins that have a 3-5/16" span while the other, part #AM3493, has a longer pin with the 3-5/16" span and a shorter pin with a 1-7/8" span. The…

Hey Jeffrey! the overall height of the Roadmaster Dual Hitch Receiver Adapter #RM68BQ is 11-1/4". The distance from the hitch pin hole to the top receiver hitch pin hole is 8-1/4". I attached a picture the full dimensions below. What are…

Hey Stan, KZ would be the authority on what the weight capacity of your bumper would be and if the 24x40 Cargo Carrier part #e99050 would work for you or not. We also have generator specific bumper carriers like the #MNT47ZR as well as more at the…

Hey John! There is a lock available for your B&W Tow & Stow 2-Ball Mount #BWTS20066BMP. B&W actually makes their own Pin Surround Lock for B&W Tow & Stow Hitches #BW82AR. This single lock covers all three pins to keep them secure…

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

The Replacement Shank for Gen-Y Adjustable Ball Mount part #325-GH-304 is my recommendation on an adjustable receiver used for flat-towing. It will provide up to a 7-1/2" rise or drop depending on configuration.

Hey Christian, thanks for reaching out! We unfortunately aren't able to key these locks specifically with existing keys, but you can reach out directly to Global Links (https://www.gld1.com/) and they'll be able to help you out with that!

Hey Gary, You'll just need some quick link/safety cable extensions. These can easily be added on while using the #RM23SR and then removed when not. We offer a few different lengths to choose from: 8" cables #RM-910648-8 10" cables…