Ground Clearance with Flexco SMFP-3100 2-Step RV Steps
Updated 07/23/2020 | Published 07/22/2020 >
Question:
I am replacing my electric step with a manual double step. What should be the clearance between the bottom of the closed step and the ground?
asked by: Stan
Expert Reply:
There really isn't a set ground clearance, the underside of the housing will sit 14-1/2 inches lower than the top of the mounting flanges as shown in the provided photo. If you measure 14-1/2 inches downward from where you'll mount the steps, you'll know exactly where the underside of the steps will sit in relation to everything else on the RV undercarriage.
I've linked to a product description video featuring the # SMFP-3100 RV Steps.
Product Page this Question was Asked From
Flexco Manual Pull-Out Steps for RVs - Triple - 8" Drop/Rise - 24" Wide - 300 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 24 Inch Wide Step
- 27 Inch Wide
- 3 Steps
- 8 Inch Drop/Rise
- 26 Inch Entry
- 27 Inch Entry
- 28 Inch Entry
- 29 Inch Entry
- Steel
- Stromberg Carlson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Will Flexco Pull-Out Triple Steps Work With Camper That Measures 31-Inches From Camper To Ground
- Shop: Flexco Manual Pull-Out Steps for RVs - Triple - 8" Drop/Rise - 24" Wide - 300 lbs
- Search Results: plastic trailer fenders
- Search Results: fender skirt rv trim
- Search Results: rv fender skirts
- Search Results: 5th wheel fender skirts
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Video: Complete Breakdown of the Stand for SL-25 25 Gallon Corner Water Caddy
- Video: Review of the Horse Trailer Side Pad
- Video: Complete Breakdown of the Trailer Horse Pad Screw
- Shop: Horse Trailer Breast Pad - 24"
- Shop: Stand for SL-25 25 Gallon Corner Water Caddy
- Shop: Horse Trailer Side Pad - 60" Long
- Shop: Trailer Horse Pad Screw
- Video: What to Know About the Lippert Manual Pull-Out Step for RVs
- Shop: Lippert Manual Pull-Out Step for RVs - Single - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
- Q&A: 3 Step RV Step Replacement Solution for Brackets 25-1/2 inches in Width
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Axle and Leaf Springs for Trailer With Lippert 3,500 lb Axle
- Q&A: Replacement Fan Motor For Kinmore Vent # RS-385 PHC2-171BVDO218-00
- Q&A: How To Determine The Correct Replacement RV Steps For A 2016 Fleetwood Storm Motorhome
- Q&A: Replacement Bearings, Races, and Seals for a Dexter Number 297697 7K Axle
- Q&A: Can Freezer Fan/Motor Be Replaced on First Gen Everchill Fridge
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: How to Replace a Rubber RV Roof
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com



