How High Above the Bed will UWS UWS07642 Toolbox Sit

Question

Question:

What is the height above the bed?

asked by: John D

0

Expert Reply:

The top of the lid of the UWS # UWS07642 truck bed toolbox will sit 2-3/4 inches above the top of the bed side.

To find where the bottom of the box will sit, measure from the top of the bedside down by 11-1/2 inches, that is exactly the height that the bottom of the box will sit at. I've linked you to a product description video for the # UWS07642 truck bed toolbox.

expert reply by: Mike L

0

click to enlarge

Answer 1

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 3

Hey Paul, congratulations on the new truck and motorhome! I can definitely help you out here. In addition to the tow bar and brake system you will need the base plate kit and your tow bar wiring. For a complete setup I recommend the following: -Demco…

view full answer...

Answer 4

Hey Mike, with truck bed tool boxes like the Deezee part #DZ8560WB the fit really just does come down to dimensions and if you compared the dimensions of this to what your truck bed has and this would fit it's going to work just fine. The overall…

view full answer...

Answer 5

Hey Brian. The Seaflo Fresh Water Electric RV Toilet item #SE95CR does not use a standard 3" or 4" RV toilet flange and you will need to purchase new hardware and additional fittings. The 18-3/4" tall x 14" wide x 17-1/4"…

view full answer...

Answer 6

Hi Tyler; as far as I know there are no significant changes on the 2026 over the 2025, and the Curt hitch (which doesn't fit the AT4) carried over to 2026 as well. We have had some customers successfully install the #DT44HR on the 2025 GMC Sierra…

view full answer...

Answer 7

Hello Robert, thanks for reaching out. Yes, a macerator toilet like the Seaflo Raw Water Electric Marine Toilet #SE72MR can be a good option for your setup since you are stationary and connected to your own septic system. Many full-time RVers in…

view full answer...

Answer 8

Hey Tod, the two UWS boxes have different shapes and capacities. If you check out the attached pictures you can see the differences between the part #UWS08298 and #UWS01044 to get a better idea. The #UWS01044 has a slightly smaller capacity at 8.2…

view full answer...

Answer 9

Hey Richard. The difference in the three MORryde hand rails is how far they extend away from the side of your trailer and how long the railing goes down the stairs. The MORryde item #MR34RV extends out 16" from the mounting point and has a…

view full answer...

Answer 10

Hi Aaron! The DeeZee Red Label 5th Wheel Tool Box - Wide, Utility Chest Style - Aluminum - 14.9 Cu Ft - Black #DZ8560WB weighs 66 pounds. I have a diagram with measurements attached as well. Figured you could probably use them. : ) Are you going to…

view full answer...

Answer 11

First thing we need to do is pick out the correct rated weight distribution system for your 28 foot Airstream. I looked up specs on what you have and the total weight could be 7,600 lbs so you'd most likely have a tongue weight range of around…

view full answer...

Answer 12

It sure does Bob and congrats on the new truck. The Curt Custom Base Plate Kit item #C66JR will indeed fit the 2026 GMC Sierra 1500 with a 3.0 diesel engine. The only models it doesn't fit for that year are the AT4X models with the AEV bumper.…

view full answer...