Lift Kit for Rockwood Mini Series Travel Trailer

Question

Question:

3000 lb dexter torflex axle

asked by: Elgin

0

Expert Reply:

Can you get me the axle info from your trailer? The brand and capacity would be what I would need to pick out the correct lift kit. Most likely it's a Dexter Torflex.

expert reply by: Jameson C

0

click to enlarge

Elgin

1/1/0001

3000 lb dexter torflex axle

Jameson C.

7/16/2020

Since we know you have Dexter 3k Torflex axles the correct lift kit is the part # K71-707-01 which will give the trailer 2-5/8 inches of lift.

Answer 1

Sounds like you have a Dexter Torflex axle on your 2015 Lance 1575 and you are looking for the correct lift kit for it. You'll need to check out the axle to determine which exact one you have. Lift #K71-707-01 is for #10 Torflex axles with 2,300…

view full answer...

Answer 2

I have a great alternative for you. I reached out to my tech at Dexter Axle with your provided serial number (thank you!). He confirmed that the Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-723-01 is not compatible with the specs on your…

view full answer...

Answer 3

For your horse trailer with Dexter Torflex 3500 lb axles, you will need the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift #K71-707-02 along with two sets of the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit #DX54FR which…

view full answer...

Answer 4

I attached a link to this page that has the install instructions for the Axle Riser Kit #LC382741 that you referenced.

view full answer...

Answer 5

Hello Jim, thanks for reaching out. We do offer lift kits that can be used with the Dexter Torsion axles. Do you happen to know the weight capacity of the axle? The S/N seems to indicate a 3,500 lb axle but please do confirm. We offer lift kits for…

view full answer...

Answer 6

I can tell you how to go about determining if a Lippert Axle Riser Kit will fit your trailer, but these are universal fits, and we don't have any way of knowing what specific axles are on any year, make, or model of trailer. So in order to…

view full answer...

Answer 7

We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…

view full answer...

Answer 8

The Axle Riser Kit - Single Square Torsion Axle part #LC382741 will lift both sides of the trailer frame up 3-1/2" to add clearance between the frame and the axle. To install the axle riser kit you want to raise the trailer one side at a time by…

view full answer...

Answer 9

Can you check the VIN sticker/plate near the coupler of your trailer to get the axle capacity and brand? It can also be listed on the axle itself. I am fairly confident it's a Dexter Torflex 3500 capacity but Forest River won't give us that…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Lift Kit for Rockwood Mini Series Travel Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching