Looking for Brake Assembly for 11 Inch Diameter Hub Drum
Updated 07/09/2020 | Published 07/08/2020
Question:
I have separate drums on my hubs, not integrated. Drum inner diameter is 11. Can these adjust down, or the 10 version adjust up enough to work correctly with an 11inch drum? Depth of drum is 3-1/8inch from mounting plate to rim. Thanks
asked by: Gary
Expert Reply:
Unfortunately, they do not. We don't carry a brake assembly for an 11 inch brake drum. It sounds like you might have a mobile home axle. If this is the case, mobile home axles are meant to be a one-time use item, then discarded. This is why so many folks use them for homemade trailers or as an inexpensive replacement. That's all fine and good until something needs to be replaced. Because they're meant for one time usage, replacement parts are typically hard if not impossible to come by.
If this is the case, your best bet would be to replace your axle with one that uses standardized parts. We offer a few off-the-shelf replacement axles, if you'd care to reply via email and let me know the bolt pattern of your wheels, the hub face to hub face dimension and the center to center distance between your spring seats I'd be happy to check to see if anything we offer would make a good replacement for you.
I've provided a photo showing the measurements needed.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: scissor jack
- Video: Review of etrailer Camper Jacks - Scissor Stabilizer Jacks Qty 4 - e74RV
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Shop: Ultra-Fab Ultra Scissor Jacks - 30" Lift - 13,000 lbs - Qty 2
- Shop: etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24" Lift - 30,000 lbs - Qty 4
- Shop: Vehicle Tow Bar Brake System
- Q&A: Solution for Replacement Hubs Using Obsolete 2585 Inner and 1380 Outer Bearing Combination
- Q&A: Hubs that Fit Bearings 2585 and 3180
- Q&A: Replacement Hubs for Old Trailer Axle Using Timken 1380 Inner/17580 Outer Bearings
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: How to Convert Trailers Air Brakes to Electric Brakes
- Q&A: Replacement Grease seal
- Q&A: Can Trailer Air Brakes Work with an Electric Brake Controller
- Shop: Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 2009 and Older 4.4K Axles
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer wiring
- Shop: Trailer Wiring
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer tires and wheels
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Brakes
