Replacement Bearings for 2005 Keystone Outback 25RSS
Updated 07/07/2020 | Published 07/03/2020
Products Featured in This Question
Question:
Hi I bought a used one, 2005 outback 25rss, but could not find the spec. Could you find the spec? If yes please let me know Thanks
asked by: Alex
0
Expert Reply:
The 2005 Keystone Outback 25RSS has a 3,500 lb axle from what I was able to determine in my research. Therefore, if you are looking for a new idler hub you can use the Dexter Trailer Idler Hub Assembly part # 84545UC1-EZ. If you just need the bearings we have these as well, the Bearing Kit for #84 Spindles part # BK2-100.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: propane cover
- Search Results: 30lb propane tank cover
- Search Results: trailer lights
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: Provider ST205/75R14 Radial Trailer Tire - Load Range C
- Shop: Kenda Karrier ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel - 5 on 4-1/2 - LR C
- Shop: RV Covers
- Shop: Go Power RV Converter and Smart Battery Charger - 12V - 55 Amp
- Shop: Shoe Hold Down Kit for 10" or 12" Electric Trailer Brake Assemblies
- Search Results: wheel bearing cap
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Torque Specs for U-Bolts on 3,500 Pound Axles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Measurement of Hole Spacing on Torflex Lift Kit # K71-725-02
- Q&A: Replacement Hubs and Brake Actuator for 2018 ShorLand'r Boat Trailer
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement Idler Hub for a Dexter 3,500 lbs Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Tire Sizing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub