Higher Weight Capacity J Style Kayak Carrier Compatible with Malone MicroSport Trailer

Published 07/17/2020

Products Featured in This Question

Malone MicroSport Trailer with J-Style Carriers for 4 Kayaks - 800 lbs

(112)

$2897.10

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(465)

$32.32

etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

(1375)

$93.55

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(155)

$208.56

Malone J-Pro2 Kayak Roof Rack w/ Tie-Downs - J-Style - Fixed Arms - Clamp On

(52)

$125.95

Question:

The specs state that it can haul four 75lbs kayaks. I have an 88lbs kayak, will it compromise trailer integrity if it’s used to haul two kayaks under 75lbs on one side and the heavier 88lbs on the other?

asked by: Doug

Expert Reply:

When it comes to carrying your 88-lbs kayak carrier on the Malone MicroSport Trailer # MPG462G2, it's not the trailer with that capacity but the Malone J-Pro Kayak Carrier # MPG117MD that has the 75-lbs capacity. You're not going to damage the trailer, but the carriers may not be able to handle the additional weight.

With that said, you could swap out the Malone carrier that is included and use the Rhino-Rack J-Style Kayak Carrier - Fixed - Universal Mount # S510 and can carry up to 99-lbs. This would be the best solution for carrying that extra kayak that weighs a little more than the included carriers can handle. The Rhino Rack S510 will fit on the bars of the Malone trailer, so there's nothing to worry about in terms of compatibility.

expert reply by: Erik B

Doug

7/17/2020

Erik B.

7/17/2020

For a hitch I recommend the Curt Trailer Hitch with 2" Receiver # C13393, since the Curt hitches have a much more durable powder coating on them that make them much more resistant to chips in the paint. This is going to translate to less chance for rust and longer life, so it's a great choice. You'll also need a 4 way wiring harness to power the lights on the Malone trailer. I recommend using the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118384 which plugs in behind the driver's side bumper. To finish out your towing package I recommend using the etrailer Ball Mount kit # 989900, which comes with multiple ball mounts with varying rise/drop, a 1-7/8" and 2" hitch ball, hitch pin, clip and carrying bag. This is a great choice if you're potentially going to be towing any other trailers and may need to use different rise/drops or different hitch balls. I've linked the installation videos of the hitch and wiring to this answer as well.