Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4-5/16" Diameter x 2-3/8" deep; all-weather, molded plastic housing; corrosion resistant; post mount; 2-wire design - grounds through mounting post; dual-face design; 1 replaceable, incandescent bulb; snap-on, replaceable amber lens.
Features:
Specs:
California residents: click here
Just as described. Nice unit for the price.
works just fine !!! I'll try not to bust one again,,but thanks it's great
Works great.
Jerry 
2/12/2025
Still performing well. Not much else to say.
Jameson C.
2/12/2025
Wanted just a simple light to use as additional parking light for front of Jeep. These serve the purpose very well. Quality made and reasonably priced. A win-win! Very quick shipment and excellent communication from the seller/business. Would definitely use again.
These lights ground by mounting…the two wires are for parking light and turn signal. I did not want the turn function so only used the white wire tied into my parking light circuit.
The lights are identical to the ones that needs to be replaced
Great lights to improve turning safety as well as being visible to the Jeep driver. I added steel protective guards similar to the guard on the WW2 Army Jeep blackout light.
The hazard light I ordered was a perfect match. It shipped the same day I ordered it. Great service and good product at a very reasonable price.
Victoria H.
10/22/2024
Hello Ronald. I am glad these lights worked perfectly for your tractor and appreciate you sharing videos of them working properly. Do you work on a farm?
Sturdy light comes with the hardware pictured. You will need a 1/2" hole to mount and hook up the wires and you are set. If you need an amber light that can be seen from front and back this is it.
Alan
1/6/2021
Been on my tractor for a year and still working great. I like having the lights on when working near the road. Set up a couple of relays and a flasher so they alternately flash.
I purchased these as replacements for the rear lights on my Kubota tractor. It seems I regularly break them off in the back country. These installed as exact replacements to the OEM lights and have worked perfectly for that past year. I actually purchased two, planned ahead, and I have not broken the first one yet!
Jcfohio
2/4/2018
After two years, these are still working great, Much to my surprise, I havent broken one off in the woods yet!
Perfect fit for my Kubota L5460, great product
Item was exactly as pictured and described. Fast shipping too!
Great item, works perfect, super fast service. Replaced factory lamp assemblies on my Mahindra tractor.
Installed these lights as replacements for the OEM on my tractor. No problems, perfect fit and the etrailer.com staff was outstanding. Thanks to Jameson, John and George.
Mike A.
8/1/2018
They are are still working great. Thanks
This is an exact duplicate of the OEM flasher lights on my Kubota tractor for a GREAT price! Shipped quickly, and put my tractor back to good as new condition.
Roger S.
7/21/2019
Like new after a year.
Perfect replacement for Kubota BX series. Although u can easily make them fit any application. These are a bargain at under $8. Dealer wanted almost $40 for one. Highly recommend and will be buying again, as needed.
Len B.
2/1/2021
1 yr later, still working great!!! Awesome value
Good quality, arrived on time, great price. Perfect fit, perfect solution. Kubota L4060.
Very robust item, perfect replacement for signal flasher on my Cub Cadet compact diesel tractor. Better quality than expected, far superior to the original part! Shipping was low cost and quick, overall best value I could find.
Jonathan J.
5/31/2020
still works great
while working on my landscaping, I backed my tractor into a bush and broke off one of the tail lights. I saw this one online at etrailer.Com and ordered it. Turned out to be identical to the other tail light, and simple install
in just a few minutes. etrailer shipped it promptly And it arrived in excellent condition. I have purchased from them before and will again, they're good people to work with. Good price, quick shipping, excellent product, 5 stars!
I installed these on my 2007 Kubota 4740 tractor to replace the expensive factory ones, and they've performed in an excellent manner. Could not be any happier.
Donnie R.
6/14/2018
One year later and all is still well. This was a great investment
Perfect lite for my application, needed a turn signal lite that extended off the side of the body, this works great
Bigguy
5/19/2018
Lights still doing fine, product and company are great. Almost wish I needed something else...but if I do, Ill come here.
best prices for this part anywhere at retail and on the web. my tractor has a set on the fenders that occasionally get knocked off....and these are quick to replace the damaged one. quality plastic, wires, etc..
Wayne A.
12/27/2017
The one product I wish there was some other cost-effective options for is the trailer light. For me, these are on the top of my tractor fenders, which tend to be broken off 2-3 times a year when I am doing work at the fields edge or in the woods. I have seen variants of this kind of product with a metal housing frame for 5x the plastic price....which makes getting plastic more cost effective, but the inconvenience of a few replacements each year. Im not certain it would be any more durable.Alternatively is to have light cages to prevent them from getting snapped off
Looks very good for a replacement light. Quick shipping, fair price.
Ronald
6/28/2021
put them on my Kubota BX1800 to replace the 20 year old originals. Work just fine at half the Kubota cost.
Exact replacement for the turn signal lights on a new Kubota 60 hp tractor. Kubota did not properly protect them where they put them. This tractor is used for commercial bush hogging and the last job wiped out both turn signal lights mounted on the rear fenders. These lights are exact replacements. Welded new guards around them now. They are a bit## to change as Kubota puts them on before the fender is put on so you have to remove a bunch of stuff to get to one of the bolts the bracket that supports this light. Now have to do the same job to another Kubota tractor that has the same problem,
Great Replaced tail light on my Kabota tractor very well-made works perfectly
Bobby T.
4/15/2020
Very well made lights. Still working and looking like the day I put it on a year later
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jarid
6/30/2025
light works just great