Replacement Tail Light for 1988 Jayco Jay-Series 1008 Pop Up Camper

Question

Question:

Good Morning, I need to replace my broken driver side tail-light lens cover for our 1988 Jayco J-Series 1008 DD Pop Up Camper. The bulbs and all work just fine. I am looking for a compatible piece unless we need to replace the entire component in which I would need those part links for both driver and passenger if we cant locate a compatible lens cover only. Thank you for your time.

asked by: Trina O

0

Expert Reply:

I am unable to find a lens replacement or the exact tail light replacement for your 1988 Jayco J-Series 1008 DD pop up camper. My recommendation is to replace the light with the Peterson Combination Trailer Tail Light - 4 Function - White Base - Red Lens - Passenger Side # V457 and if you want the license plate mount # V457L. If you don't want the plate mount and just want the matching set the # V457 will work for both sides.

expert reply by: Jason S

0

click to enlarge

Answer 1

RV makers do not maintain details/specs on the smaller items like tail lights that they install when fabricating their RVs. The USA-made Peterson Rectangular Stop/Tail/Turn/Reflex Trailer Tail Light #V457L is for the driver-side of a trailer and it…

view full answer...

Answer 2

I pulled a Bargman 99 Series Trailer Clearance, Side Marker Light, part #3499001 from our warehouse to check out the wiring for you. There are only 2 wires needed for this marker light. One would be used for the ground and one for the power. Since…

view full answer...

Answer 3

The mounting holes of the Stabilizer Jack #TJ01RT are 7/16" in diameter so any bolt 1/32" smaller than that will fit the hole. The length is going to depend on your setup. The bolt thickness can be a bit smaller as long as the head of the…

view full answer...

Answer 4

Since most trailer manufacturers do not make wheel and tire information available to the general public, it is hard for me to tell you what size lug nuts you have on the wheel. I can tell you they do have caps over them. The most common size of lug…

view full answer...

Answer 5

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 6

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Replacement Tail Light for 1988 Jayco Jay-Series 1008 Pop Up Camper

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching