Wheel Bolts That are 1/2 Inch Diameter and 1-3/4 Inch Long
Updated 06/24/2020 | Published 06/11/2020
Question:
I need a wheel hub stud for a Magic Tilt Boat Trailer. It is 1-3/4 inch total length. 1/2 inch dia. It has a flange or lip in the center to separate the hub thread from the lug thread. Can you help? Thanks
asked by: Charles W
Expert Reply:
We do have a 1/2" diameter wheel bolt that is close to 1-3/4" long which may work for you.
The Kodiak Wheel Bolt # K12WB169 is 1-11/16" long, but that does not take into account the lip of the bolt, as you can see by the accompanying diagram of the bolts that I added.
I have also added a link to a video review for you to check out of the Kodiak Wheel Bolt # K12WB169.
Product Page this Question was Asked From
Kodiak Wheel Bolt - 1/2" Diameter x 1-11/16" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-11/16 Inch Long
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: DeeMaxx Trailer Wheel Lug Nut - Chrome - 1/2" - Qty 1
- Shop: Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel - Qty 1
- Shop: DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long
- Shop: DeeMaxx Trailer Wheel Lug Nut - Chrome - 9/16" - Qty 1
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 1.98" Outer Diameter
- Shop: Grease Seal - Double Lip - I.D. 1.688" / O.D. 2.332" - Older UFP Hubs/Marine Axles - Qty 1
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: The Low-Down on the Grease Cap, 1.99" OD EZ Lube Drive in with Plug
- Video: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug Spec Review
- Video: CE Smith Trailer Wheel Lug Nut Spec Review
- Video: Kodiak Wheel Bolt Review
- Video: In-Depth Review of the DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug
- Video: Review of Dexter Replacement Mounting Stud 10 Inch Hydraulic Hub And Drum - T0508101
- Search Results: bearing dust cap
- Search Results: dust caps
- Q&A: Replacement Lug Stud with 0.545 Inch Knurl
- Q&A: Wheel Stud that is Longer Than K12WB2 with Same Diameter
- Q&A: Thread Pitch of Dexter 9/16 Trailer Wheel Lug Nut STN569
- Q&A: Replacement Wheel Bolt Stud That Matches The Lippert 121803 Wheel Stud
- Q&A: Can Old Grease Seals Be Reused When Changing Trailer Bearings
- Q&A: Replacement Wheel Studs or Bolts for UFP Hub with H-1377 Stamp on Hub
- Q&A: How to Read the Date Code on a Trailer Tire
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
on Accessories and Parts
John H.
6/22/2020
Thanks for your reply. Unfortunately, the wheel stud that was displayed does not meet my trailer needs. The stud that I need looks more like 1/2 inch all thread material. Half the stud screws into the wheel hub, the other half the lug nut screws on. Separating the two halves is a lip or flange slightly raised.