Thread Pitch of Dexter 9/16 Trailer Wheel Lug Nut STN569
Updated 09/23/2016 | Published 09/22/2016
Products Featured in This Question
Question:
I would like to know the thread pitch on the dexter 9/16 trailer lug nuts? I have 2 7000# dexter straight axles with electric brakes. 8 lug
asked by: Jay
0
Expert Reply:
On Dexter 9/16-inch lug nut # STN569 the thread pitch is 18-TPI. I went to our warehouse and did a test fit of this lug nut on Dexter hub/drum # 8-219-13UC3, which meets your description of an 8-on-6-1/2 Dexter hub with 9/16-inch studs for 7K axles.
expert reply by:
Adam R
0
Product Page this Question was Asked From
Dexter Trailer Wheel Lug Nut - 9/16" - 90-Degree Coned - Right-Hand - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- 9/16 Inch Wheel Bolt
- Hex Nut
- 1 Inch Outer Diameter
- 90-Degree Cone
- Zinc-Plated Steel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Wheel Lug Nut - 9/16" - 90-Degree Coned - Right-Hand - Qty 1
- Shop: 12 Gauge 2 Conductor Jacketed (Brake) Wire Per Foot
- Search Results: 9/16 lug nuts
- Search Results: trailer hubs and drums
- Search Results: trailer wiring
- Search Results: trailer brakes
- Search Results: trailer brake wiring
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6.5 - 9/16" Studs
- Shop: Trailer Wheel Lug Nut - 5/8"
- Video: What to Know About the Powerbuilt Deluxe Bearing Packer
- Shop: Powerbuilt Deluxe Bearing Packer
- Shop: Provider ST235/80R16 Trailer Tire with Black Mod Wheel - 8 on 6-1/2
- Shop: Spare Tire Cover
- Search Results: trailer stake pocket
- Search Results: spare tire mount
- Q&A: Lug Nuts Keep Coming Loose on Double Axle Trailer
- Q&A: Removing and Replacing Trailer Spindles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: The Low-Down on the Grease Cap, 1.99" OD EZ Lube Drive in with Plug
- Video: A Closer Look at the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles
- Video: In-Depth Review of the DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug
- Video: Kodiak Wheel Bolt Review
- Video: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug Spec Review
- Video: Review of Dexter Replacement Mounting Stud 10 Inch Hydraulic Hub And Drum - T0508101
- Shop: Tire Chains
- Q&A: Replacement 1/2-20 Wheel Stud for 5200 lb. Axle
- Q&A: Can Bias Ply Spare Be Used on Trailer with Radial Tires
- Q&A: Can Old Grease Seals Be Reused When Changing Trailer Bearings