How To Find Correct Replacement Hubs for 2015 Ranger Boat Trailer
Updated 06/26/2024 | Published 03/07/2023
Question:
HI- Looking for assistance in ing new hubs for a Ranger Boat Trailer. It is a 2015 dual axle trailer.
asked by: Joey S
Expert Reply:
I have a few options for you to help with replacing the hubs on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the hubs based off industry standards. For example, a 3,500 lb axle uses L68149 and L44649 bearings like what comes with the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles part # AKHD-545-35-EZ-K. The other option would be to take the hubs off the trailer and either read the part numbers off the old bearings or measure them with a dial caliper to the nearest thousandth of an inch. I have attached an article that goes over this process in more detail.
I have also attached a link with list of our hub selection.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hub
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Shop: Terran Axle Trailer Idler Hub Assembly for 3,500 lbs Axle - 5 on 5
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Q&A: Availability Of 5 On 4-1/4 Hubs And How To Measure A 5 Or 6 Lug Pattern
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: How to Measure for Replacement Trailer Hubs
- Search Results: 4769~28
- Search Results: fulton t1401
- Search Results: fulton winch spring
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Shop: LED Clearance and Side Marker Trailer Light w/ Flange - Submersible - 7 Diodes - Round - Red Lens
- Shop: LED Trailer Clearance and Side Marker Light w/ Flange - Submersible - 5 Diodes - Round - Red Lens
- Search Results: 008~435~05
- Shop: Dexter DB-35 Single-Wheel Disc Kit - 10" Zinc Rotor - 5 on 4-1/2 - 3.5K - 1-3/8" Spindle
- Q&A: Replacement 10" Hub and Rotor Assembly With Bearings for 2015 Ranger Boat Trailer
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Video: Dexter 10" Hub-and-Rotor Assembly: The Breakdown
- Search Results: trailer bearings races seals caps
- Search Results: axle dust caps
- Q&A: Exploded Diagram for a Fulton XLT Series Winch
- Q&A: Is 4769-28 The Correct Replacement Spring for a Fulton T1802 Hand Winch
- Q&A: Replacement Spring For A Fulton Single Speed Winch # FT16020301
Gary
6/26/2024
i need a replacement hub assembly for my 2015 Ranger boat trailer.