Can the Shank On the Equal-i-zer Be Flipped for Use With a 2017 Toyota Sienna

Question

Question:

Hi, I am trying to use my new 2017 Toyota Sienna XLE with my Equilizer weight distribution hitch and small RV. The hitch I buy from you will leave the hitch receiver top at just 13 inches over ground. The shank on Equilizer will that to about 5 inches. That’s too close for comfort. Can I invert the shank and rebolt the rest of Equilizer to gain some clearance? Or do you have other suggestions? Which hitch for under Sienna do you recommend for this application? Thanks,

asked by: Doug W

0

Expert Reply:

The trailer hitch I recommend for a 2017 Toyota Sienna is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76112 as it has a hidden design, is rated for use with a weight distribution system, and has a partial trailer connector mounting bracket.

In regards to using the Equal-i-zer Weight Distribution System part # EQ37060ET, you can invert the shank to provide a rise up to 7" so you won't have any issues with ground clearance.

expert reply by: Conner L

0

Answer 1

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 6

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Answer 7

Hey Brooks, we are located near St. Louis, MO in the US and we can ship to Canada. The K-Source tow mirrors part #KS48NQ are a confirmed fit for your 2026 Toyota Tundra TRD as well.

view full answer...

Answer 8

Hey Chad, Good question and you will need spacers for your 2024 Toyota Tundra with the factory lift when installing the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL24JQ. The rear lift on the Tundra is 2 inches…

view full answer...

Answer 9

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 10

Hey Tommy, you would choose the blue SumoSprings #SS46PV for lighter loads, daily driving, and a softer ride, ideal for occasional towing. While black SumoSprings #SS66PV are better for heavier trucks, frequent towing, and consistent loads, offering…

view full answer...

Answer 11

Hey Joe, welcome back! The Furrion Chill Cube Variable Speed part #FR57TQ that you referenced is designed to fit roof thicknesses between 1.5 inch and 2 inch so yours being 2.75 inch is not a problem at all and would not require any additional…

view full answer...

Answer 12

Hey Jon, Most trailer wheel and tire combos - like the Kenda Karrier #KE69JV - do not come pre-balanced. Typically, trailer owners don’t worry about balancing since trailers don’t ride as smoothly as passenger vehicles and you’re not feeling that…

view full answer...

Can the Shank On the Equal-i-zer Be Flipped for Use With a 2017 Toyota Sienna

Products Featured in This Question

Continue Researching