Is There a Front Mounted Trailer Hitch Compatible with 1996 Ford Bronco?

Question

Question:

Model 31026 shows it fits F150, but doesnt fit Bronco... Is this a mistake, or is there a good reason that it wont fit my Bronco?

asked by: Buddy T

1

Helpful Expert Reply:

The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31026 is only a confirmed fit for 1992 - 1996 Ford F-150 models. We have rear mounted hitch options but there isn't a front mounted hitch compatible from any of our manufacturers.

It if often due to the frame mounting locations, ground clearance, and even trim. If you need to carry something there are other options to consider. If you want a snow plow there are custom brackets. Let me know if I can help with a specific recommendation.

expert reply by: Jason S

1

Answer 1

I spoke with my contact at Curt and he said the front sway bar on your 1996 Ford F-150 stays in place. You only need to remove the bolts holding the sway bar plate and enlarge those holes to 1/2 inch diameter. The hitch comes with new hardware to…

view full answer...

Answer 2

The hitch does fit with the sway bar on the front of your 1994 Ford F-150. The skid plate may have to be removed or possibly trimmed to install the Curt front mount hitch #31026. The hitch has not specifically been tested on a model that has that…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Is There a Front Mounted Trailer Hitch Compatible with 1996 Ford Bronco?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching