Dimensions of ComeUp Battery Isolation Switch for DV and Seal Series Winches

Updated 05/21/2020 | Published 05/14/2020

Question:

I am looking at ComeUp Battery Isolation Switch for DV and Seal Series Winches Item # CU881097 to install for my superwinch tiger shark 9500 winch. Can you provide the size info, height, width, etc. I plan to mount it next to the battery in 2016 jeep wrangler.

asked by: Randy A

Expert Reply:

I was able to have the ComeUp Battery Isolation Switch for DV and Seal Series Winches part # CU881097 pulled from our warehouse and measured just for you. The following is what we were able to obtain.

The overall depth when the t-handle is ON is 3 5/8". The overall depth when the t-handle is OFF is 3 7/8". The base mounting plate diameter is 2 5/8". The measurement of the mounting holes from center to center is 1 3/4". The actual diameter of the mounting holes themselves is 3/8". The height of the t-handle from the mounting plate to the top of the handle when the handle is ON is 2 1/8" and the height of the t-handle when it is OFF is 2 1/4". The overall length of the t-handle is 3 1/8".

expert reply by: Conner L