See what our Experts say about this ComeUp Accessories and Parts

• Dimensions of ComeUp Battery Isolation Switch for DV and Seal Series Winches
  I was able to have the ComeUp Battery Isolation Switch for DV and Seal Series Winches part # CU881097 pulled from our warehouse and measured just for you. The following is what we were able to obtain. The overall depth when the t-handle is ON is 3 5/8". The overall depth when the t-handle is OFF is 3 7/8". The base mounting plate diameter is 2 5/8". The measurement of the mounting holes from center to center is 1 3/4". The actual diameter of the mounting holes themselves is 3/8". The...
  view full answer...
• Front Mount Hitch Options for a Winch on a 2018 Ford F-150
  The front mount hitch receivers from Curt and Draw-Tite that fit your 2018 Ford F-150 are parts # C31083 and # 65067 respectively. Both of these are rated for 9,000 lbs line pull and 500 lbs vertical load. From the 2 bolts holes on the Curt to the top of the receiver tube measures just under 7-1/2" while that same distance on the Draw-Tite is closer to 7". The Draw-Tite will give you more ground clearance but not by much. Instructions for both receivers have been linked for you to reference. If...
  view full answer...