Will the Replacement Fan Blade for Advent Air RV Air Conditioner Fit An AC135

Question

Question:

Does this part fit a Advent AC135? It says it fits ACM135 but my unit says Advent AC135.

asked by: Joshua

0

Expert Reply:

Yes, the Replacement Fan Blade for Advent Air RV Air Conditioner part # PXX128050095 will fit a Advent Air RV Air Conditioner part AC135/ACM135 as it's the same unit.

expert reply by: Conner L

0

Answer 1

To replace your Parallax 7445 converter you can use the Progressive Dynamics 9200 Inteli-Power Converter #PD9245C. This has the same amperage so you can just reuse the wiring running from the converter to the battery bank. The Parallax 7445 should…

view full answer...

Answer 2

There should be a sticker with some info on the underside of your Advent AC unit. If you check out the picture of the bottom of the Advent Air RV Air Conditioner #ACM150 you can see where the sticker is located and I highlighted where you'll find…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 11

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Will the Replacement Fan Blade for Advent Air RV Air Conditioner Fit An AC135

Continue Researching