Disc Brake Kit to Fit Karavan Trailer with 3,750 lb Axles
Updated 05/11/2020 | Published 05/07/2020
Products Featured in This Question
Question:
Good day I currently have a Karavan trailer with dual 3750 torsion axles. My current hub with is a ufp dB-35 10” rotor hub takes bearings L68149/L44649 and races L68110/L44610 with a seal of 2.56/1.68 and 1.98 dust cap. I want to upgrade my brakes to the Kodiak kit 10” selling for $480 that work with 13” rims. My question is that the Kodiak hub/rotor in this kit take the same bearings with same inner diameter but it takes a different race and the seal is slightly different. Is this going to be a problem will it still work on my axle? Would I run my current size seal with the Kodiak hub ? And is one race size being different any issue?
asked by: Lou C
Expert Reply:
The Kodiak disc brake kit you are wanting part # K2HR35D can be used on your axle but you will just need to go with a different seal instead, part # 168255TB. This has the same outer diameter as what the hubs fit but instead has the correct inner diameter for your spindle size. The bearings you need then are # L68149 and # L44649 like you mentioned as well.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Shop: Dutton-Lainson Hand Winch Strap
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,500 lbs
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - Extra Heavy Duty - 4,800 lbs.
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs
- Shop: Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet and KodaGuard - 5,200 to 6,000 lbs
- Shop: Bow Roller Assembly w/ Bells for 4" Wide Bracket - TPR - 1/2" Shaft - Black
- Q&A: Recommended Brake Assemblies for Karavan Boat Trailer with 3500 lb Axle
- Video: Square #84 Spindle for 3,500-lb Trailer Axles: The Breakdown
- Search Results: trailer spindles
- Search Results: trailer drop axle
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: Picking Out Disc Brake Components for EZ Loader Trailer
- Q&A: Recommended Parts To Convert Drum To Disc Brakes On EZLoader Trailer With 3,500 Lb Axle
- Q&A: Brake Kit Upgrade For A Boat Trailer With UFP DB-42 Brakes
- Q&A: Difference Between Kodiak 3,500 lb Hub & Rotor Disc Brakes
- Q&A: Does The Replacement Mounting Bracket for Kodiak Disc Brake Caliper # KCMB10HRD Come With Hardware
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure a Trailer Axle
- Article: How Much Does a Boat and Trailer Weigh?