Fish Wire Size Needed for Installing Draw-Tite Class III 76128 Hitch on 2018 Honda CR-V

Updated 05/07/2020 | Published 05/06/2020

Products Featured in This Question

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2634)

$13.58

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1362)

$13.46

7/16" Bolt Leader

(76)

$4.43

Question:

To install the Draw-Tite 76128- Curious so I know what size fishing wire I need to get. Thanks for any help you can provide.

asked by: William K

Expert Reply:

To install the Draw-Tite Class III, part # 76128, you'd need 4 of the 7/16 fish wires, which are available as part # 80103-1. They are included with the hitch, but that's what you'd need if you've misplaced them.

If you'll be using the hitch for towing, you'll also need a # 118741 trailer wiring harness, a # 2753 ball mount and # PC3 hitch pin. For a trailer ball, use # 19260 for a 1-7/8 or # 63845 for a 2 inch ball.

If you use the provided links, you can see installation videos for the hitch and wiring harness, as well as pdf copies of the installation instructions.

expert reply by: Mike L