Correct Replacement for Dexter Hub/Drum 8-415
Updated 04/29/2020 | Published 04/27/2020 >
Products Featured in This Question
Question:
good day, height distance from floor to bottom of outer bearing cup grove is 7 5/8 distance from bottom of outer bearing cup grove to magnet face of drum 3 3/8 also drum and hub one piece. will also be looking for shoes and magnets one axle machine is a rayco 1824 woodchipper 2013
asked by: Mike G
Expert Reply:
I was able to cross reference the Dexter Hub/Drum 8-415 to the Dexter Trailer Hub Drum Assembly part # 8-430-5UC3 which should be an exact replacement. I don't have any depth measurements of the above/drum but what you would need to measure to confirm is the inside of the contact surface on the hub where the shoe rides and this should measure 12-1/4" x 3-3/8". If so, you should be good to go.
In regards to braking assemblies, the best option we have is the Dexter Brake Kit part # 23-450-451 or part # 23-410-411.
Product Page this Question was Asked From
Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 387A / 25580
- Standard Grade
- For 10000 lbs Axles
- For 9000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: pollak 12 706
- Search Results: 1980a
- Search Results: curt 51180
- Shop: Performance Tool W2973C 6/12V Circuit Tester 'n Probe Light for Cars, Trucks, Tractors & RVs
- Shop: Shocker Hitch Gooseneck Coupler w/ Demco eZ-Latch and 9" Offset - Square - 30K
- Search Results: 20037b
- Shop: Timken Hi-Temp Red Grease for Disc and Drum Brakes - 14 oz Cartridge
- Search Results: equalizer
- Search Results: trailer hitch
- Shop: Brake Controller
- Shop: Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Red
- Shop: Curt Pintle Hook with 2" Ball - for 2" Hitches - 10,000 lbs/16,000 lbs
- Shop: Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End
- Shop: Timken Replacement Trailer Wheel Bearing - LM67048 - Qty 1
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 2010a
- Shop: Vehicle Engine Heaters
- Q&A: Replacement Oil Seal For Dexter 10,000 lb Hub From 2006 to Replace National 370150BG
- Q&A: What is the Capacity of a Dexter P-12 Model D100 Axle
- Q&A: Looking For Grease Hub For 2004 Single Axle Marine Master Trailer
- Q&A: Can Global Link Vise Lock, Entry Door Latch, and Cam Lock Be Keyed Alike
- Q&A: Hub and Drum Assembly with 8 on 6-1/2 Bolt Pattern for Dexter 10,000 Pound Trailer Axle
- Q&A: Are Pacbrake Alpha HD Air Bags Compatible With Turnoverball On 2024 Ford F-250
- Article: Trailer Wiring Diagrams
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Gooseneck to 5th Wheel Adapters
- Article: Brake Controller Installation: Starting from Scratch
- Article: Anti-Rattle Devices
- Article: How to Tell the Weight Rating of a Trailer Axle

