Solution for HappiJac Truck Camper Jack That Needs Rebuilt

Question

Question:

Is there a way to rebuild this jack

asked by: Bud K

0

Expert Reply:

We have replacement legs for the HappiJack truck camper systems like the part # LC736515 which has 36-1/2 inches of lift and a 2,800 lb capacity as well as the # LC736514 which has 34-1/2 inches of lift and a 2,200 lb capacity but the legs themselves do not have rebuild kits available.

expert reply by: Jameson C

0

Answer 1

That shouldn't be a problem but what is the hitch size of your 2020 Silverado? It could be a 2 inch, 2-1/2 inch hitch, or even a 3 inch hitch. Measure the inside height and width and let me know.

view full answer...

Answer 2

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Jake, thanks for reaching out! You'll actually want to keep the OEM hitch on your 2005 GMC Sierra 2500 to install some TorkLift tie-downs as there aren't any TorkLift tie-downs that fit with the SuperHitch Original #TLC1204. For your OEM…

view full answer...

Answer 6

Hey John, congrats on the new truck. Yes, the Brophy Slide In Camper Tie-Downs - Extra Clearance item #HSAB can be used with your 2026 Ram 3500 dually. What turnbuckles did you use previously with your 2021 Lance 865?

view full answer...

Answer 7

It sure is Joe, and welcome back! The Roadmaster Rear Anti-Sway Bar item #RM46GR is definitely compatible with the TorkLift SuperHitch item #TLD1108 installed on your 2014 Ram 3500. This sway bar is meant to replace and upgrade your factory one. Do…

view full answer...

Answer 8

Hey Cary, The Brophy In Bed Camper Tie Downs- Extra Clearance #HSAB are compatible with your 20116 Ram 3500 Dually. These extra clearance tie downs are meant for the dually applications so you will have no issues with that. There are also frame…

view full answer...

Answer 9

Hello Jeff, Sounds like you’ve got a big camper (about 4,000 lbs) on your 2024 F-350 dually, and when it’s loaded, the truck feels bouncy and sways a bit. That’s pretty common with heavy campers, especially if the suspension is still stock.…

view full answer...

Answer 10

Hello Ken, thanks for reaching out. Sounds like you are on the right track here because the type of running boards on your truck do dictate which tie downs to use. You are also correct that you will not be able to use the tie downs from your old 2002…

view full answer...

Solution for HappiJac Truck Camper Jack That Needs Rebuilt

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching