Hanger Placement on the Tandem HAnger Kit part # APT8
Updated 04/27/2020 | Published 04/24/2020
Question:
I NEED A INSTALLATION GUIDE FOR PART NUMBER APT-8. I WILL BE INSTALLING YOUR P# APT-8
asked by: James L
Helpful Expert Reply:
There is no definitive guide to the installation of the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs part # APT8. It is designed as a universal tandem axle trailer hanger kit. It can be used in many different situations. Basics are the hangers get welded to the trailer where you will require them for you application and everything attaches to them.
It depends on the leaf springs you are using. Basically you will need to mock it all up before permanently installing anything on the trailer. Generally speaking the distance between hangers would likely be 24-3/4 inches on center to 29-1/2 inches on center but again it depends on the springs being used. These are just rough guide lines and really the only way to get the right spacing for a given trailer is to mock everything up and adjust as needed.
I have included a guide for you to check out which cover proper positioning of them to get the best results. Check it out.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Article: Where to Position the Trailer Axle?
- Search Results: hydraulic fluid fuel transfer pump
- Search Results: hydraulic oil fuel transfer pump
- Search Results: dump trailer
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-3/8" Long
- Shop: Replacement Power Unit for etrailer and Ram Hydraulic Trailer Jacks and Scissor Hoist Systems
- Q&A: Hanger Distance for Installing 25-1/2 inch Leaf Springs with Hanger Kit # APT8
- Q&A: Installation of Hanger Brackets and Springs for Tandem Trailer Axles
- Q&A: How to Determine Hanger Spacing on Tandem Axle Trailer
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Shop: Center Hanger for Double-Eye Springs - 5-7/16" Tall - 3/4" Bolt Hole
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center
- Search Results: trailer leaf springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear/Center
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Q&A: Tandem Axle Trailer Suspension System Dimensions for Best Function
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit
- Q&A: Recommended Gas Strut for my Husky In Bed Truck Tool Box
- Q&A: Dimensions of Center Hanger in Redline Tandem-Axle Trailer Hanger Kit for Double-Eye Springs APT8
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: How To Choose Camper Leaf Springs
- Search Results: trailer tires and wheels
on Trailer Suspension Parts
