Do All A-Frame Trailer Jacks Use the Same Mounting Pattern and Center Hole

Updated 04/23/2020 | Published 04/22/2020

Question:

I have a 10ft trailer that needs a new jack. The top hole is 2 1/4 and the bottom whole is 1 7/8 inch Diameter. It is 3 1/2 inch deep from one whole to the next. Can you give me a product number.

asked by: Robert R

Helpful Expert Reply:

The a-frame trailer jacks all use a standard mounting pattern and center hole size for the most part so although I am not quite sure what you are measuring I can confirm we have options, the Ultimate Trailer Jack part # 322-RDJ-2K is a good one because of the adjustable outer tube. I have attached a full list of options for you but they should all be direct bolt-on replacements.

expert reply by: Conner L