Difference Between Hidden Hitch 87571 and Draw-Tite # 75679

Question

Question:

What is the difference between Hiden Hitch 87571 and 75679 for 2010 Lincoln MKT ? Thanks

asked by: Cecil H

0

Expert Reply:

Part 87571 and # 75679 are the same hitch. Hidden Hitch was a brand owned by the same company that has since dissolved, so the hitch labeled with the Draw-Tite sticker and number is now the part number for both. The brand name was the only difference so now they just all have the Draw-Tite sticker so if you have found a Hidden Hitch it is just old stock.

I've attached a video of the installation for you.

expert reply by: Jason S

0

Answer 1

Hello Eric. For your 2014 Ford Flex V6 dual exhaust I recommend the etrailer Class 3 Hitch #e52AR. This has a 2" receiver and is rated for 4,000 lbs towing and 400 lbs of tongue weight. This is also the most affordable hitch option available for…

view full answer...

Answer 2

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Yes, I can tell you what you need to tow your 2013 Ford Flex behind your Jayco Motor Home. I recommend Roadmaster Base Plate kit part #RM-524435-4. The Roadmaster base plate installs on the front lower frame of the Flex behind the bumper to provide…

view full answer...

Difference Between Hidden Hitch 87571 and Draw-Tite # 75679

Featured Help Information

Miscellaneous Media

Continue Researching