5th Wheel Hitch Mounting Bracket/Rail Kit for Installing Curt Q16 Hitch 2020 Ford F-150

Question

Question:

Im picking up my new 2020 Ford F150. I was wondering what kit rail would accommodate my new truck. Thanks herb

asked by: Herb

0

Expert Reply:

For a Curt 5th wheel install bracket/rail kit for your 2020 Ford F150, I'd recommend the Curt # C16442-204. This kit is compatible with the Curt Q16 5th wheel hitch you referenced. I've linked to a product description video for you.

If you wish to install a 7-way trailer connector and wiring harness in the truck bed, I'd recommend # 50-97-410-010.

expert reply by: Mike L

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

Hey Tim, I checked with Demco and the bracket kit part #DM8552027 that you referenced is correct for your 2014 Chevy Silverado 1500. Do you already have the rails and the hitch?

view full answer...

Answer 3

Hi Jeremy! B&W does indeed have an option for your 2001 Ford F250. The B&W Patriot 5th Wheel Trailer Hitch w/ Slider and Universal Install Kit - Dual Jaw - 18,000 lbs #BW38XR is a sliding hitch, which is recommended for short bed trucks, and…

view full answer...

Answer 4

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 5

The Curt Custom 5th Wheel Install Kit part #C16443-204 which is a fit for your 2003 Ford F-250/F-350 will use three bolts to secure the base rail to the frame bracket and one bolt to secure the base rail to the bed floor on each side. Therefore, you…

view full answer...

Answer 6

You should have 22" from center to center of the rails (pictured below) in your kit #C16200. I typically get the first rail installed and then drop the hitch I plan on using into the first rail and use it to help set the second rail in place and…

view full answer...

Answer 7

Hello Dean, thanks for reaching out. I do have a good option for you, although we do not have an exact match for the Atwood model R1737BB. Take a look at the GE Profile Propane RV Range #GE24VR. This is a 3 burner gas range with a stainless finish.…

view full answer...

Answer 8

The alarm on the Bright Way #BW94FR is designed to go off whenever the trailer is disconnected. So as soon as it no longer senses power from the 7 way plug on your truck, it will activate the alarm. It sounds like the 7 way plug on your truck only…

view full answer...

Answer 9

I do have an option for you but you can't mix fifth wheel rails and brackets (holes don't line up) so you'll have to purchase both the rails and brackets in a kit. The good news however is that the Husky 15K EZ Roller uses standard rails…

view full answer...