Can Demco Base Plate Connect to Roadmaster Tow Bar

Question

Question:

I just purchased RM-522 Tow Bar and DM9519236 Base plate for 2010 Honda Fit. I want to confirm that these parts will work together and do not require additional parts. Thx

asked by: Cheneyar

0

Expert Reply:

To use the Demco base plate you have of part # DM9519236 with the Roadmaster Tow Bar part # RM-522 the correct adapter you need is the # RM-034 as the two cannot connect directly since they are different manufacturers/designs.

expert reply by: Jameson C

0

Answer 1

Hey Mike, we do have the parts you would need to flat tow your 2009 Honda Fit behind your 2017 Winnebago Sunstar 29VE. The first thing you'll need is a base plate kit like the Blue Ox part #BX2253 which is my favorite design because of how well…

view full answer...

Answer 2

For your 2010 Honda Fit I recommend the Demco Tabless Base Plate Kit - Removable Arms Item #DM9519236 and the Demco Dominator Non-Binding Tow Bar - Victory Series - RV Mount - 2" Hitch - 7,500 lbs Item #DM9511008. The base plate comes with…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

Thanks for the information Bob! Flat towing a leased 2025 Ford Bronco Badlands without making any modifications is going to be creative when it comes to powering your lights and a braking system but we do have all the parts you'll need. I've…

view full answer...

Answer 9

Hey Lucian! There are definitely a lot of options out there, and the best is usually a mix of parts from different manufacturers. We don't have a package under a single part number but I can give you a list of parts for a complete setup. I…

view full answer...

Answer 10

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

view full answer...

Answer 11

Hi Brian, To flat tow your 2026 Ford Ranger XLT with your Blue Ox Avail Tow Bar, you'll need: - Blue Ox Base Plate Kit w/Removable Arms part #BLU77ER, this will require some minor drilling, and the tow hooks must be removed and remain off the…

view full answer...

Answer 12

Hey Kirt, Congrats on the new car! To get your car safe to flat tow you'll need the following parts: Base-Plate #RM39FR Tow-Bar Adapter #RO64FR Lighting #RM-15267 Chargeline #RM-156-25 Air-Force One Vehicle Side #SM99209 and Hose #SM99666 (if you…

view full answer...

Can Demco Base Plate Connect to Roadmaster Tow Bar

Products Featured in This Question

Continue Researching