Dimension Of Hook Opening Of Demco Safety Cable Extensions

Question

Question:

What is the size of the opening for the hook?

asked by: Stephen D

0

Expert Reply:

The Demco Safety Cable Extensions part # DM9523064 hooks have a 1" opening. So where you have placed the arrow in your wonderful attached photo measures 1".

expert reply by: Heather A

0

click to enlarge

Answer 1

We were able to measure for you the Demco Safety Cable Extensions #DM9523064. As you can see by the accompanying diagram, the entire length of the extension is 16-1/4 inches, the cable by itself is 12-5/8 inches and the hook is 4-1/2 inches. I have a…

view full answer...

Answer 2

I called and emailed JR Products multiple times with no response so instead of purchasing the Quick Links - 1/2" #37201345 I recommend going with the Curt Threaded Quick Link - 1/2" Diameter #C82932, which have a safe working weight load of…

view full answer...

Answer 3

I just heard back from Demco and their 12" Long Safety Cable Extensions item #DM9523064 are 1/4" in diameter.

view full answer...

Answer 4

You are correct in that the Roadmaster FuseMaster Fuse Bypass part #RM76511 and the Blue Ox Fuse ByPass Switch part #BX88272 both have a 20 amp max fuse rating. This is mainly due to the gauge of wire that is used in the harness in relation to the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Dimension Of Hook Opening Of Demco Safety Cable Extensions

Product Page this Question was Asked From

Continue Researching