Lippert Hydraulic Pump Replacement for 2004 Cedar Creek Fifth Wheel

Question

Question:

I am trying to find the replacement pump and reservoir for my 2004 Cedar Creek fifth wheel. I have a bedroom and living room slide that are operated by the unit. Please let me know which model is the direct replacement. Thanks

asked by: John J

0

Expert Reply:

The replacement pump part # LC167576 that you referenced is most like what you need based on what you described. But to be sure you can compare the pictures of the unit this pump fits, part # LC141111 and you'll know for sure.

expert reply by: Jameson C

0

Answer 1

You can definitely connect a 5th wheel wiring harness to the bumper 7-way on your truck. The second in-bed 7-way connection is simply to give an easy access point and clean look. It keeps the wiring from dragging or moving against your tailgate, so…

view full answer...

Answer 2

The Replacement 7 Quart Vertical Pump Assembly #LC251910 will run at about 1,500 to 1,600 psi with a maximum of 2,150 psi, which is the level it will be at when the jacks are fully extended. I have attached a short video review that you can check out…

view full answer...

Answer 3

Hi Richard; do you have anything else that identifies this? The A1090526 doesn't correspond with anything I was able to find so I'm not sure what it is exactly or what hydraulic pump motor will work as a replacement. Is it a Lippert hydraulic…

view full answer...

Answer 4

Hey Darlene, thanks for the information! The ROHS 414849 is a Parker brand hydraulic pump motor that Lippert makes a replacement for. It's the Replacement Hydraulic Pump Motor item #LC167576. What kind of RV do you have?

view full answer...

Answer 5

Hey Adam, thanks for the information. I just spoke with Lippert and to replace the motor on your Lippert LCI 650187 Hydraulic Pump Assembly you'll need the Replacement Hydraulic Pump Motor item #LC167576 you were looking at. What kind of issues…

view full answer...

Answer 6

To replace the motor on the LCI Pump 650057 we have the Replacement Motor #LC167576.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Lippert Hydraulic Pump Replacement for 2004 Cedar Creek Fifth Wheel

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching