Mounting Tab and Hole Size and Spacing of Ultra-Fab # UF48-979006 Scissor Jack

Question

Question:

What is the distance between the two mounting tabs? In other words the width of the legs. Thank You.

asked by: Rupert

0

Expert Reply:

If you look at the photo I edited for you, you will be able to see all the dimensions of the mounting tabs on the top of the Ultra-Fab # UF48-979006 Scissor Jack.

expert reply by: Mike L

0

click to enlarge

Answer 1

The Ultra-Fab Ultra Scissor Jacks #UF48-979002 will replace the standard 24" jacks that come on your 2018 Grand Design Imagine 2150RB travel trailer. If you find that the jacks are constantly needing blocks to make up the additional height to…

view full answer...

Answer 2

Yes, the Lippert stabilizer kit part #LC369774 that you referenced does fit your 2020 Grand Design Imagine 22MLE. Another really cool option is the auto leveling and stabilizing kit from Lippert the Ground Control TT part #LC672136 which with the…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 5

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 6

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 7

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

I sure can BJ. To add a keyless entry lock to your 2025 Airstream, I recommend the Bauer NE RV Entry Door Lock for Trailers item #BA33UR for a left handed lock or item #BA53UR for a right handed lock. These locks have Bluetooth capability and a PIN…

view full answer...

Answer 10

If what you have now Chad is pretty flat at 26 inches then the best replacement size would be 25-1/4 inches like you mentioned. Since you wanted to increase the capacity you would want the part #e57SR which is for 4k trailer axles.

view full answer...

Answer 11

Ron, you’ll be fine with two people. Each Thomas Payne Rest Easy Trifold Loveseat - whether it’s the Dellmead #TP49KR, Driftwood #TP69KR, or McCoy #TP79KR - weighs around 153 pounds, and it ships in two manageable sections (the base and the back), so…

view full answer...

Answer 12

Hey Scott! In order to get you the correct grease cap I am going to need you to take a measurement off of your hubs pilot hole or one of your other center caps. The Grease Cap item #RG04-040 you were looking at has an outer diameter of 1.99".…

view full answer...

Mounting Tab and Hole Size and Spacing of Ultra-Fab # UF48-979006 Scissor Jack

Product Page this Question was Asked From

Continue Researching