Recommended Center Cap for a 2022 Grand Design Imagine Travel Trailer
Updated 02/03/2026 | Published 07/08/2024
Question:
Hi, Im looking for the correct grease cap for a 2022 Grand Design 2970rl Imagine travel trailer. Was hoping you could help me out. thanks Scott
asked by: Scott L
Expert Reply:
Hey Scott! In order to get you the correct grease cap I am going to need you to take a measurement off of your hubs pilot hole or one of your other center caps. The Grease Cap item # RG04-040 you were looking at has an outer diameter of 1.99". This is measured from the outer edges of the cap. If you're measuring one of your hubs you'll need to measure from the inside of the pilot hole across.
Product Page this Question was Asked From
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.99 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- TruRyde
more information >
Continue Researching
- Search Results: trailer tires and wheels
- Search Results: rv covers
- Search Results: suspension enhancement
- Shop: Aluminum Sendel Series T02 Machined Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2
- Shop: Taskmaster Trailer Wheel Center Cap w/Center Plug - 4.25" to 4.27" Pilot - Stainless Steel
- Shop: Goodyear Endurance ST205/75R15 Radial Tire w/ 15" Silver Modular Wheel - 5 on 4-1/2 - LR D
- Search Results: center caps
- Search Results: trailer bearings races seals caps
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size
- Shop: Adco SFS AquaShed RV Cover for Travel Trailers up to 28-1/2' Long - Gray
- Shop: etrailer RV Cover for Travel Trailers up to 30' Long - Gray
- Search Results: goodyear endurance st205/75r15
- Search Results: hub plug
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Floor Mats
- Q&A: Troubleshooting Spring Bars Falling Off on Fastway e2 Weight Distribution System
- Q&A: What's the Date Code on Kenda Tires
- Q&A: What Grease Is Preloaded in the etrailer Easy Grease Trailer Hub AKIHUB-545-2-G-EZ-2K?
- Q&A: What do All the Numbers on My Grease Seal Mean? What Numbers are Important?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Article: Trailer Wiring Diagrams
- Q&A: Availability of Dexter Bearing Kit for 3,500 lb Axle
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Article: Most Popular Wheel Bearings
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Jerred H.
2/3/2026
Hey Scott, were you able to get the measurement from your hub’s pilot hole or center cap? Once you had that number, did the grease cap end up being the right fit for your trailer? Your update could make it easier for the next person checking their hub size.