Replacement Axle Needed for 4" Drop AL-KO 3,500 lb Axle

Updated 03/31/2020 | Published 03/30/2020

Products Featured in This Question

Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs

(784)

$452.05

Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard - 4" Drop - 5 on 4-1/2 - 3.5K

(25)

$1764.61

Question:

My axle for an enclosed car hauler was damaged and I am unable to take measurements of it to replace it. Stamped on the axle I can read inch AL-KO M-N D35 3 CAP 3500 LBS SLR 316 inch I know that it is a 4 inch drop and 3500 lbs but I cannot find a d35 specific axle.

asked by: Hunter D

Expert Reply:

To determine the correct replacement axle for your application I would need you to take the hub-face (HF) and spring-center (SC) measurements (see attached). I reached out to my contact at Dexter Axle and they said that unfortunately the only thing that can be determined from your information is that it should be a drop axle on a 3" tube but aside from that they can't really determine the HF and SC measurements.

I am linking our selection of replacement axles for you to check out. We do offer axles with a 4" drop like the Dexter Axle # 7685269 which has a 95" HF and an 80" SC if that matches what you have.

If you are absolutely unable to take any measurements then you might be interested in the Timbren Axle-Less systems like part # A35RD545E with the 4" drop. These install right to the trailer frame and they use integrated AEON progressive-rate main springs instead of leaf springs.

I have attached some videos for you to check out.

expert reply by: Jon G