B&W Companion Latch Handle Stuck and Wont Unlatch
Updated 04/10/2024 | Published 03/01/2020
Products Featured in This Question
Question:
I have loosened the bolt from the hitch to the latch. I have sprayed wd40 into the tube. I’ve connected the trailer to the hitch and let the weight of the trailer to try to unbind. I’ve ran out of ideas so after a couple of hours messing with it, I took a crow bar to the latch handle and it moved it out. I’m thinking rust. Any thoughts on how to prevent this from happening? Use some grease?
asked by: Ralph B
Expert Reply:
I am a big advocate of preventative maintenance, a little bit of maintenance can save a lot of time and frustration down the road. So I recommend lubricating the hitch well and making sure that you are in line with the trailer on level ground so unhooking is a little easier.
The B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3400 has 4 main points that need to be lubricated.
The polyurethane bushings (that the head sits on) need a thin layer of white lithium grease like # L11354.
The inside of the jaws need a thin layer of automotive grease.
There is a grease zerk at the bottom of the head to grease the saddle and keep the head pivoting properly.
Finally the top surface can get a thin layer of lube, or a lube plate can be used like # 16721.
If you're having trouble removing the fifth wheel hitch from your truck and not disconnecting the trailer I recommend checking the draw down bolt on the slider. In order to remove the safety pin on the turnover ball, the draw bolt has to be loosened or the pin won't move.
If you already tried this, or loosening the draw bolt doesn't work, let me know and I can look further into it.
Product Page this Question was Asked From
B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
- 5th Wheel Gooseneck Adapter
- Adapts Truck
- Gooseneck Hitch to 5th Wheel Trailer
- No Extra Clearance
- 20000 lbs GTW
- Connects to Gooseneck Hole
- Not Shock Absorbing
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Fifth Wheel Hitch
- Shop: B&W Companion 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
- Shop: Suspension Enhancement
- Shop: Timbren Rear Suspension Enhancement System
- Search Results: fifth wheel hitch
- Search Results: b and w 5th wheel hitch
- Video: Setting up the Timbren Rear Suspension Enhancement System on a 2019 Ford F-150
- Shop: B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package - Dual Jaw - 20,000 lbs
- Video: Installing the B and W Companion 5th Wheel Trailer Hitch on your 2016 Ford F-250 Super Duty
- Shop: B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
- Video: B and W Companion 5th Wheel Trailer Hitch Assembly
- Search Results: b&w companion slider
- Search Results: b & w companion
- Q&A: Troubleshooting Latch Pin on B&W Gooseneck Hitch That Will Pull Out But Won't Rotate
- Shop: Gooseneck Hitch
- Search Results: sliding fifth wheel 5th wheel hitch
- Shop: Mud Flaps
- Video: Checking Out the B and W Companion 5th Wheel Trailer Hitch
- Shop: Side Window Vents
- Video: Complete Breakdown of the Timbren Rear Suspension Enhancement System-TFR1504E
- Shop: WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set
- Shop: Tool Box
- Q&A: Troubleshooting B and W Companion Release Handle that Doesn't Want to Release
- Shop: Putco Element Window Visors - Matte Black - 4 Piece
- Shop: Putco Element In-Channel Window Rain Guards - Tinted - 4 Piece
- Shop: Nerf Bars - Running Boards
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Does Truck with 6-1/2 Foot Bed Need a Slider Hitch
Jarrod P.
3/23/2024
Robert, What do you suggest when the latch handle is stuck in the locked position, and will not move. I have tried WD-40, crowbar, hammer and even a come-a-long to get the latch to become free so I can remove the hitch from my truck to use the full truck bed. Any help would be great.