Customers compare BWRVK3500-5W to these similar products
Products Featured in this Video
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I spoke with my contact at B&W and he said that your case is rare but they have seen this happen before. When you are able to pull the handle on your gooseneck hitch back but you can't rotate it what is happening is that the there is a spring…
view full answer...Normally the pin pulls right out easily. What you can do is try spraying lube like WD40 down into the hitch tube to see if you can get it let go. What could also be happening is that the base is binding up in the hitch tube. It may not be an ideal…
view full answer...Sorry to hear about your hitch! In order to determine the best course of action with your hitch, do you have the manufacturer/model of hitch that you have? Thanks so much!
view full answer...I am a big advocate of preventative maintenance, a little bit of maintenance can save a lot of time and frustration down the road. So I recommend lubricating the hitch well and making sure that you are in line with the trailer on level ground so…
view full answer...You'll need to loosen the tracks on the bottom of your Companion hitch so that you can position them to fall into the valleys of your truck bed surface. This will allow the hitch to fit and position properly.
view full answer...I reached out to my contact at B&W regarding the issue you're having with the safety pin on your Turnoverball Gooseneck Hitch #BWGNRK1314 with the Companion Slider #BWRVK3400 mounted. He said it sounds like the draw-down bolt on the slider…
view full answer...The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.
view full answer...When adjusting the height of a pin box such as #LC1191191 it is important to support the pin box when removing the bolts. I recommend 2 or 3 buddies to give you a hand and make sure no one is beneath the pin box while raising or lowering it. With the…
view full answer...The airbags that I recommend for your 2018 Ford F-250 are the Air Lift LoadLifter 5000 Air Helper Springs part #AL57399. These airbags will not interfere with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1116 as you can see…
view full answer...The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs #BWRVK3500 has the polyurethane molded bushings on the pivot arms. This is where noise and squeaking could come into play, so the manufacturer recommends using…
view full answer...Not unless you're using a rotating pin box. The Companion Adapter like item #BWRVK3500 can not be used with rotating pin boxes due to the torque on the square receiver. This 5th wheel hitch only works with B&W turnoverball systems with the…
view full answer...For your 2017 Jayco Jay Flight SLX 267BHSW travel trailer, I recommend the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403. This is a very nice weld on option adjustable from 47-1/8 to 77 inches. For a bolt on option, I…
view full answer...