Colors Available of Optronics Door Grab Handle

Question

Question:

Is the Optronics door grab handle available in white? My existing handle is white with 8 1/4 inch hole centers.

asked by: Rich

0

Expert Reply:

While there are some RV door grab handles available in white, the Optronics Door Grab Handle is only available in Tan # 01180089B.

For a white handle you have the following options:

- Assist Handle for RV Entry Door - Cotton White # 3729482-000-111

- Soft Touch Assist Handle for RVs - White with Black Grip # AH-100

expert reply by: Kyle S

0

Answer 1

While many of our parts are the same or similar to those used by the OEM when building their RV's, we do not have the ability to look up vehicle specific parts for your 2004 American Coach American Tradition Motorhome. We have the #CAM42175 for…

view full answer...

Answer 2

That is a pretty cruel prank someone could pull, and dangerous. You would need to either prevent the handle from being folded towards the door by blocking the path or secure the handle so it sticks out all the time. Since you would need to fold it in…

view full answer...

Answer 3

I recommend checking out the Camco Fold-Away RV Grab Handle #CAM42175 as an alternative to the Soft Touch Assist Handle #AH-150. This handle has a folding feature to minimize how much it sticks out from your RV when not in use, and it's about…

view full answer...

Answer 4

Hey Marvin, We offer two 18" long grab handles; Black with Black Grip #AH-150 and White with Black Grip #AH-100. I recommend putting some butyl tape #AL28FJ on the back of the handle to prevent water from leaking in through the screws.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Colors Available of Optronics Door Grab Handle

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching