How To Use a Curt Q25 5th Wheel Hitch On a 2020 Chevy Silverado 2500 with Pucks

Question

Question:

I have an old Curt Q25 5th Wheel hitch I want to use on my new 2020 Chevy Silverado 2500 with pucks. Is There any sort of option for this?

asked by: Zach

0

Expert Reply:

Yes, the Curt Q25 5th Wheel Hitch like part # C16265 will work on a 2020 Chevrolet Silverado 2500 if you obtain the Curt OEM 5th Wheel Hitch Legs part # CU53FR. The Curt OEM 5th Wheel Hitch Legs will attach to the Curt Q25 5th Wheel Hitch Head and then allow you to drop the hitch into the pucks for a direct, bolt-on fit.

expert reply by: Conner L

0

Answer 1

Yes, there is Larry! To attach your Curt Q20 5th wheel hitch to the pucks in your Silverado's bed you'll need the etrailer Q-Series OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep Package item #e89PR. These will bolt right to the side of…

view full answer...

Answer 2

Hey Craig, yes the leg kit part #e89PR that you referenced will work to adapt the head of a Curt A20 hitch to fit the OEM pucks of your 2024 Chevy Silverado 3500. How'd you like your A20 hitch?

view full answer...

Answer 3

Thank you for all of the information regarding your Curt Q25 5th Wheel Trailer Hitch #C16265 being stuck on your 5th wheel trailer. It sounds like you've got 2 things going on here; the first is that the jaws are binding, and the second is that…

view full answer...

Answer 4

The Curt Q25 #C16049 or the sliding hitch #C16566 with the Demco 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lbs #DM6099. The driver's side of the hitch is supposed to be level with the passenger side. The…

view full answer...

Answer 5

It sounds to me like the jaws on your Curt Q25 5th Wheel Trailer Hitch - Dual Jaw - 25,000lbs Item #C16265 need to be greased or that you may have backed into the king pin with the jaws not locked in the coupling position and could have damaged the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Mark, the only real downside to an offset ball like the Gen-Y part #GY43XR is going to be that it costs more typically and it would take up more room when stored compared to a non-offset ball like the #C38CR. The handling and weight carrying…

view full answer...

How To Use a Curt Q25 5th Wheel Hitch On a 2020 Chevy Silverado 2500 with Pucks

Products Featured in This Question

Continue Researching