How to Determine if a 2009 Hyundai Santa Fe has a Tow Package
Published 05/16/2012
Question:
How can I confirm if my 2009 Santa Fe has a factory installed tow package so I will know which wiring to order? Thanks
asked by: BC
Expert Reply:
From the research I did the easiest way to determine if you have a tow package would be to check to see if your 2009 Hyundai Santa Fe has a transmission cooler mounted in front of the radiator. A transmission cooler looks basically like a miniature radiator that will be mounted in front of the radiator.
If your vehicle has a transmission cooler then you know it has a tow package. You can also look under the driver side wheel well to see if the connections are there. Check out the video I attached at the 2:07 mark to see where the connections are and what they look like.
Another option if the above would not work for you would be to have a Hyundai dealer run the VIN number of your vehicle. They will be able to tell from that.
I also attached installation instructions for this product for you to check out.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: tester
- Shop: Trailer Wiring
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Shop: Brophy Circuit Tester for 4-Pole Flat Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2023 Hyundai Santa Fe CU94FR
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Is There Fire Concerns with Tekonsha Trailer Wiring Harness # 118784
- Shop: Trailer Hitch
- Q&A: Troubleshooting No Runnings Lights After Optronics LED Combination Tail Light Kit Installation
- Video: What to Know About the Brophy Circuit Tester for 4-Pole Flat Trailer Connector
- Q&A: What Can Be Used To Test Your Trailer Connectors For Functionality
- Q&A: How Do I Tell if My Hyundai Santa Fe Has a Tow Package?
- Video: Curt Towing Starter Kit for 2" Hitches Spec Review
- Video: DIY Install: Curt Towing Starter Kit for 2" Hitches on your 2020 Tesla Model Y
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Q&A: Right Turn Signal & Running Light No Working After Replacement
- Video: Install: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2023 Hyundai Santa Fe
- Video: Hands-On with the Brophy Circuit Tester for 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
on Custom Fit Vehicle Wiring
