Can Electric Ground Control TT Automatic 5-Point Leveling System # LC672136 Fit Boxed Frame RV

Question

Question:

Can the part # LC672136 be mounted on a rectangular tube frame? 2019 Outdoors RV, Backcountry series, Model 23KTS. Thanks,

asked by: Robert B

0

Expert Reply:

Yes, we have checked with Lippert in the past and their Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System # LC672136 is compatible with boxed frame RVs like your 2019 Outdoors RV Backcountry series Model 23KTS.

expert reply by: Jameson C

0

Answer 1

The Lippert Ground Control 3.0 #LC675817 can fit non I-beam trailer frames like what you have. You'd need to drill access holes in the frame so that you can attach the brackets to the opposite side. Or you could have the brackets welded.

view full answer...

Answer 2

I may have a solution for you on this, but the short answer to this is- no. Stabilizer jacks and auto-leveling systems have two fairly different functions and the PSX2 system is not going to be able to function as an auto-leveling system with any…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 9

Hi Seth! The B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs #BWRVK3270 will fit any industry standard rails (also referred to as ISR) perfectly, but there are technically a few rails out there that it will not fit. Those…

view full answer...

Answer 10

Tony, that's a great question, and you're absolutely right to double-check before ordering. Yes, etrailer part #PD69RR is the Progressive Dynamics PD9345V converter charger. The PD69RR number is our internal etrailer part number, while…

view full answer...

Answer 11

Hello Sean, Thanks for writing in. For a replacement hardware kit you will want to order the Replacement Hardware Kit for Trailer Hitches #RHK. Above "ADD TO CART" you will need to put "Curt C15410" so the warehouse knows what…

view full answer...

Answer 12

Hey Aaron, welcome back! Since your 2017 Ford F-250 has 5th wheel rails installed you've got a wide range of options. The Demco Autoslide 5th Wheel Trailer Hitch item #DM8550035 you were looking at would definitely work. This is the Cadillac of…

view full answer...

Can Electric Ground Control TT Automatic 5-Point Leveling System # LC672136 Fit Boxed Frame RV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching