Torque Spec for 9/16" x 3" Long Bolt for Suspension
Published 12/05/2019
Question:
Need the torque on 9/16 diameter 3 inches log
asked by: Rolando
0
Expert Reply:
There is not a specific torque requirement for bolts like the Shackle Bolt # 166081. You'll want to make sure that you're using a lock nut and ensure that the bolts you use are long enough so that when installed you will have at least 2 threads protruding that lock nut.
expert reply by:
Erik B
0
Product Page this Question was Asked From
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 3 Inch Long
- ABS Fasteners
more information >
Continue Researching
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: 2-3/8" Round Trailer U-Bolts (Qty 2)
- Shop: Dexter Bronze Bushings - Qty 4
- Video: The Low-Down on the Dexter Shackle Bolt for Double Eye Springs
- Shop: Leaf Spring Bushing - Bronze - 1.74" Long x 0.70" OD x 0.58" ID - Qty 1
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Shop: Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs
- Q&A: Torque Spec For Leaf Spring Shackle Bolts
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Search Results: k71~291~00
- Search Results: trsl275
- Search Results: apubr~10
- Search Results: d014~077~00
- Q&A: Torque Specs for Redline Shackle Bolt with Locknut
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Video: Hands-On with the 2-3/8" Round Trailer U-Bolts (Qty 2)
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Video: Complete Breakdown of the Bronze Bushing
- Video: Let’s Check Out the Dexter Bronze Bushings
- Search Results: trailer lights
- Search Results: wesbar side marker light
- Search Results: side lights
- Q&A: Proper Torque for Trailer Suspension Wet Bolts
- Q&A: Torque Rating Requirements for Installing Leaf Springs on a 7000 lb Tandem Axle Trailer
- Q&A: How Does the Flush Mount Grommet # A91GB Install a # AL91AB Light Into a Trailer
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Q&A: Torque Specs for Axle Spindle Nut, Suspension Hanger Bolts, and Lug Nuts for Trailer