Trailer Hitch Recommendation For 2020 Chevrolet Traverse To Carry Accessory

Question

Question:

Need a trailer hitch for the 2020 chevy traverse for 2" cargo carrier that my grandma gave me which is best?

asked by: Laura

0

Expert Reply:

We have two hitch options for the 2020 Chevrolet Traverse to carry a cargo carrier the Curt Trailer Hitch Receiver part # CU29FR, or the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e56YR. These hitches are very similar except for their finishes. The Curt has a traditional glossy finish and the etrailer hitch has the modern matte black finish. Both of these hitch receivers can be covered by the knockout panel when not in use. I have attached an installation video for each hitch for your reference.

expert reply by: Heather A

0

click to enlarge

Answer 1

A hitch and trailer wiring can certainly be installed on a 2021 Chevrolet Traverse. The etrailer Trailer Hitch Receiver #e56YR would be a great choice; this is confirmed to fit all models of the 2021 Traverse. It has a max towing capacity of 5000lbs,…

view full answer...

Answer 2

Based on the weights you have provided it looks like the trailer tongue weight is about 13 percent of the gross trailer weight. If you were to add 600 pounds to the trailer than would bring the gross trailer weight to 3,100 pounds and the tongue…

view full answer...

Answer 3

To add a hitch to your 2024 Buick Enclave, I recommend the Draw-Tite item #76184. This hitch is custom fit and bolts to your Buick with included hardware. I really like the Draw-Tite hitch item #76184 because it installs behind your rear bumper cover…

view full answer...

Answer 4

For most people the install of the etrailer hitch part #e56YR would probably take a couple hours to install. For a dealer though I would assume maybe about the same but they might charge you for two shop hours. The charge would be based on what their…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since your truck is apparently not equipped with the factory 4-way connector, the brake controller output wire has not been run to the rear of the truck. You will need the 4 to 7-way trailer connector adapter, part #37185 and the brake controller…

view full answer...

Answer 7

I have both a 4-way and 7-way connector that are custom fit for your 2023 Chevy Traverse. They are the 4-Way Curt T-Connector Vehicle Wiring Harness item #C56394 and the 7-Way Curt T-Connector Vehicle Wiring Harness item #C56393. These custom-fit…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Sorry to hear about this! I am guessing you are referring to the Curt Hitch - 2" #CU29FR. If this is the hitch you have installed, the most common issue with not being able to install the center hitch cover over the hitch results from not lining…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Trailer Hitch Recommendation For 2020 Chevrolet Traverse To Carry Accessory

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching