Which Lynch Pins to Use with Roadmaster Hitch Pin for Jeep D-Ring Bumper Mount Tow Bar Adapter

Question

Question:

what Lynch/safety pins do I need to buy for 910044 base pin? Have the Roadmaster adapter to allow me to attach my sterling towbar to my offroad jeep bumper. Lost the pins and safety pins. Need to buy both. Thanks

asked by: Brian A

0

Expert Reply:

The correct lynch pins to use with the Roadmaster Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters # RM-910044 is the # RM-910024. These are sold in a pair.

expert reply by: Jameson C

0

Answer 1

Typically, the wire colors are brown for running lights, green for right turn and brake lights, and yellow for left turn and brake lights. White is ground. To confirm this on a trailer you can trace the wires back to see where they terminate or take…

view full answer...

Answer 2

The Replacement Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters #RM-910044 are 7/8" in diameter as they can fit in both 7/8" and 1" diameter mounting holes.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 7

Thanks for the information Bob! Flat towing a leased 2025 Ford Bronco Badlands without making any modifications is going to be creative when it comes to powering your lights and a braking system but we do have all the parts you'll need. I've…

view full answer...

Answer 8

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

view full answer...

Answer 9

Hey Lucian! There are definitely a lot of options out there, and the best is usually a mix of parts from different manufacturers. We don't have a package under a single part number but I can give you a list of parts for a complete setup. I…

view full answer...

Answer 10

Hey Kirt, Congrats on the new car! To get your car safe to flat tow you'll need the following parts: Base-Plate #RM39FR Tow-Bar Adapter #RO64FR Lighting #RM-15267 Chargeline #RM-156-25 Air-Force One Vehicle Side #SM99209 and Hose #SM99666 (if you…

view full answer...

Answer 11

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 12

Hey Don, congrats on the new truck and thanks for all of the information! I recommend the Roadmaster Direct-Connect Base Plate Kit - item #RM87NQ. Roadmaster's baseplate kits and wiring set the standards for flat towing as far as quality and…

view full answer...

Which Lynch Pins to Use with Roadmaster Hitch Pin for Jeep D-Ring Bumper Mount Tow Bar Adapter

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching