RV Camper Cover for Lance 975 Slide-In Camper

Question

Question:

Will this cover fit a Lance 975? Or which one will. Thanks

asked by: Andy H

0

Expert Reply:

From what I could find it looks like a Lance 975 slide-in camper is 19-1/2' long so the Camco UltraGuard # CAM45770 for 18' campers isn't quite long enough. The Camco UltraGuard # CAM45773 is designed or 19-1/2' campers but you'll need to measure the overall length of the box part of your camper as this fits a box length of 97" (the box includes everything but the part that hangs over your truck cab).

If the Camco box part doesn't fit then the Adco SFS AquaShed Truck Camper Cover # 290-12263 is your next best option. This is designed to fit boxes between 120" - 144" long and has an overall length of about 20'. The only part that may be of concern is the height, which for this cover is 104". If you can get the me the exact dimensions of your Lance camper I can help you verify which cover fits your camper best.

expert reply by: Jon G

0

Answer 1

For a better cover than the Camco UltraGuard Slide-In Camper Cover #CAM45773 you originally purchased, I recommend the following for your 19' 2018 Lance 975 Truck Camper: - Classic Accessories PolyPro III Deluxe RV Cover #CA80037 This cover is…

view full answer...

Answer 2

I am happy to help you figure out the cover that you need for the 2011 Palomino 1000 to withstand the harsh Michigan winter. I believe the Palomino 100 is a truck bed camper. I have attached a diagram that shows where to measure to get the correct…

view full answer...

Answer 3

I have an answer about the clamps. Unfortunately, on the Surco 2 Bike Carrier for Van/RV Ladders #SP501BR, the mounting brackets that are designed to attach to the ladder rail are non-adjustable. They are designed to clamp around 1-inch diameter…

view full answer...

Answer 4

For your 2022 Lance 850 truck camper that measures 18 feet in length the best option for a cover is the Camco Ultraguard part #CAM45770 which provides the best protection in hot and dusty climates and also is easier to fit and install.

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

The Camco UltraGuard Slide-In Camper Cover, #CAM45773, will fit a slide-in camper that measures up to 19 feet 6 inches long. In my research, I found the length of an Artic Fox 990 Slide-In Camper to be around 17 feet. The #CAM45773 may be too long…

view full answer...

Answer 7

Hey Keith, it sounds like you're looking for the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7200. These will bolt to your frame mounted overload bump stop bracket, has a simple no drill install, and is a universal fit…

view full answer...

Answer 8

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Answer 9

Hey Lori, thanks for reaching out! The TorkLift Tie Downs #TL87DR are a custom-fit kit, so there’s no drilling required on the truck itself. Everything bolts up to existing holes in the frame, which helps keep the install pretty straightforward. As…

view full answer...

RV Camper Cover for Lance 975 Slide-In Camper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching