Mounting Dimensions Of The Bargman 7-Way Super Sealed Connector 50-87-004
Updated 06/25/2020 | Published 11/13/2019
Question:
I am wondering about the dimensions of this vehicle end 7 blade connector. How much width and height flat space do I need for bumper mounting and how far does the rigid end stick out on the other side of the bumper the part that tapers down to the wiring cord. So...I am looking for something like 3 inches wide by 2.75 inches high flat space on the outside of the bumper and that it for example sticks out behind the bumper 5 inches before the cord can flex a different direction. I am just making these numbers up and am hoping you can give me the exact measurements. And do you ship to Canada? Thanks,
asked by: Paul C
Helpful Expert Reply:
I went to the warehouse and pulled a 7-Way Super Sealed Connector # 50-87-004 to measure. This connector provides 4 feet of cable, is 6" from the front edge of the trap door/cap back to where the cable flare ends. The mounting plate measures 3" x 3" on the outer edges.
You will need a 2 inch hole in order to mount the Bargmann 7-Way Super Sealed Connector, # 50-87-004. I have attached a diagram which illustrates the exact measurements of the connector as well. We do ship to Canada and I hope this helps get you started.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 50~87~004
- Shop: Voyager Heavy-Duty Surface-Mount AHD Rear Camera - White Housing
- Shop: Trailer Wiring
- Shop: Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket
- Shop: TecNiq LED Trailer Tail Light - Stop, Tail, Turn, and Reverse - Oval - Red and Clear Lens
- Shop: TecNiq LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Shop: Voyager Camera System- 3 Camera - Hardwired- 7" Screen
- Shop: Rear View Safety Backup Sensor Reversing System
- Shop: Rear View Safety Backup Camera System with Side Cameras and Quick Connect Kit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer wiring
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer jack
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Shop: Brake Controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Search Results: trailer lights
on Custom Fit Vehicle Wiring
James G.
6/22/2020
Would you have a mounting pattern with hole size? We are looking to install these on our rear hitch plates that are 1" thick the pattern would be helpful to have it laser cut before hand.