All About the 7-Way Super Sealed Connector w/4' Cable Video

Based on the sticker and weight ratings showing it would be a class III hitch. The difference between a class III like the Curt Trailer Hitch Receiver Item #C13903 and IV hitches like the Curt Trailer Hitch Receiver Item #C14002 is typically the…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

The diode that you want for your charging line from your Motorhome to your towed vehicle (Toad) is the Roadmaster Single Park Light Diode #RM-690. This diode will allow up to 85 amps at 12V and will only allow power to flow in one direction to…

When equipped with the Max Trailer Tow Package, specific axle ratios, and cab size, your 2011 Ford F-150 XLT with the 3.5L EcoBoost can have a maximum towing capacity of 11,300 pounds. Again, this is dependent on how your truck came equipped from…

Yes the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part #C59236 does have a 4-way flat that can be turned into a 7-way connector. For just basic lighting functions the Buyers Products Trailer Connector Adapter - 4-Way to…

I looked at some pictures of the 7- and 4-Way connectors on the 2011 Ford F-150 and it appears that you can use bracket #HM40978 with little to no modification. I have included a link to a video featuring this bracket for you.

I agree with you on the aesthetics aspect with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #75691 for your 2010 Ford F-150. Keep in mind the Draw-Tite class III hitch has a 600 lb max tongue weight and a…

We offer a specialty hitch for the F-150 with installed factory hitch that mounts underneath the factory hitch to provide you with dual receivers. This hitch #TLF1005H from TorkLift is shown as fitting 6-1/2-foot bed trucks fitted with factory…

The Class lV trailer hitch that is designed to fit your 2011 F-150 is the Curt Hitch, part #C14002. This hitch has a 2 inch receiver opening. I went to the warehouse and measured the receiver material. It measures 1/4 inch thick. I measured a Class…

We have one trailer hitch that fits your 2011 Ford F-150 with a factory hitch and it happens to have rather high towing capacity of 8,000 lb trailer weight and 800 lbs tongue weight without weight distribution and 15,000 lb total trailer weight and…

It is pretty uncommon that a 2013 Ford F-150 does not have any factory trailer connector. Most often there is a 4-way connector installed, which you can see if your truck had one but is missing by looking on the driver side on top of the spare tire…

Yes, the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part #RP85FR is designed to work with a 2-5/16" hitch ball. A better way to determine the clearance between the bed rails and pin box, is to install the pin box and adjust…