Installing a 7-Way Trailer Connector on a 2019 Subaru Outback Wagon

Question

Question:

I'd like to install the draw-tite 76227 trailer hitch as well as a 7-way connector for a brake controller on my 2019 subaru outback. can you tell me what I need?

asked by: Tim W

0

Expert Reply:

You can install a 7-way connector on your 2019 Subaru Outback since you plan on towing with the Draw-Tite Hitch # 76227, and to do so you'll need to start with a 4-way connector, the T-One Vehicle Wiring Harness # 118467. This will simply plug into connection points in your Outback's cargo area so no type of splicing is needed. I have added a link to the instruction manual and an install video on a '19 Outback for you.

The next thing you'll need to add is the Universal Installation Kit for Trailer Brake Controller # ETBC7 which will give you a 7-way connector, circuit breakers and the rest of the hardware needed to install a brake controller. I have added a link to a help article on installing this kit which I highly recommend taking a look at.

Then for a brake controller the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR is an awesome option because its control knob which keeps a bulky unit out of the cab of your Outback, and because of the control it gives you over the braking power on your trailer.

I have added a link to a video review of this controller to check out as well.

expert reply by: Kyle S

0

Answer 1

The 2013 Subaru Outback does not have factory trailer wiring, which means there isn't a strictly plug-and-play brake controller for this vehicle, so you'll need to add the wiring to your Outback to use a brake controller. You'll need to…

view full answer...

Answer 2

We do have what you need to add a 7-way trailer connector to your 2018 Subaru Outback Wagon but there isn't a specific custom harness that fits. If right now the Outback has no trailer wiring at all the easiest way to add a 7-way is to start with…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Installing a 7-Way Trailer Connector on a 2019 Subaru Outback Wagon

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching