Correct Derale Engine Oil Relocation Kit for 1999 Dodge Ram with 5.9L Motor

Question

Question:

Will this work on a 1999 dodge ran 1500 5.9

asked by: H.T.

0

Expert Reply:

The Derale Oil Filter Relocation Kit you mention, # D15718 is not the correct oil filter relocation kit for you 5.9L motor, as the engine thread size is wrong.

Part # D15715 uses the correct engine thread size, 3/4 -16 for your motor and will allow you to use the same PH16 oil filter you currently use.

expert reply by: Mike L

0

Answer 1

From what I could find on your Perkins 4.236 Diesel Engine, it has threads that are 3/4"-16 for the oil filter. As long as that is correct the Derale Oil Filter Relocation Kit for Multiple Engine Thread Sizes #D15748 will work with your engine.…

view full answer...

Answer 2

Yes, the Derale Oil Filter Relocation Kit #D15748 will fit your 1965 Pontiac GTO with the 389ci engine. Your oil filter uses a 13/16"-16 thread diameter. We also have the Derale Oil Filter Relocation Kit #D15716 specifically for the…

view full answer...

Answer 3

With the Derale Oil Relocation Kit like part #D15748 or part #D15718, there are O-rings included to mount the adapter to the engine block. Per the included instructions a light coat of oil should be applied to the O-rings when they are installed. The…

view full answer...

Answer 4

The lug nut torque will depend of the diameter of your wheel studs and the construction of your wheels. • For a steel wheel and a 1/2 inch stud, torque the lug nut to 90-120 foot lbs • For a steel wheel and a 9/16 inch stud, torque to 120-140 foot…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Correct Derale Engine Oil Relocation Kit for 1999 Dodge Ram with 5.9L Motor

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching